Page 2
• Replace the dust bag if it smells, even if it is not full. • The motor protection filter will eventually need to be replaced. Contact an LG Electronics Hold the product with one hand and take out customer service center.
Page 3
MAINTENANCE Remove dust from the motor protection filter and exhaust filter once every 3 months and wash it using room temperature water. • To avoid odor and the malfunction of the motor, allow the motor protection filter and the exhaust filter to dry completely in a well- ventilated area out of direct sunlight for at least 24 hours before reassembling.
Page 4
Product setting The internal motor of the product is not operating properly . initialization doesn't • Disconnect the power plug from the outlet and contact an LG Electronics Service Center. work even after the power plug is plugged in again.
Page 5
Two icons [dust The motor that holds the Vacuum Cleaner isn't working properly. emptying (replace • Disconnect the power plug from the outlet and contact an LG Electronics Service Center. bag) and auxiliary battery] flash The motor that opens and closes the Vacuum Cleaner dust bin cover isn't working simultaneously.
Page 8
LG Customer Information Center For inquiries or comments, visit www.lg.com or call: U.S.A. 1-800-243-0000 1-888-542-2623 CANADA Register your product Online! www.lg.com...
Need help?
Do you have a question about the VDS-ST1 Series and is the answer not in the manual?
Questions and answers