Operation Menu - PR TANGO 750 FRAMING Manual

fixture's DMX output to the third fixture's DMX input, and so on until all projector are connected in this way. Eventually connect the last
fixture's DMX output to a DMX terminator. Set 1
maximum quantity of projectors in a DMX chain be less than 32.
Start Addresses of all Slaves are 001; Operation mode of the Master can be set any mode for a Master' and Slaves' operation mode can
be set accordingly.
After Powered on, the group will run in Master/Slave Mode.( The number of projectors in a DMX chain is 32pcs at maximum)

6. OPERATION MENU

1st LEVEL 2nd LEVEL
DMX setting DMX Address
Total Reset
Colour System
Reset Gobo Reset
Zo.Fo. Fr.
Other Reset
DMX Channel Mode
Loss of DMX
Config Set
Disp. Config
Temp. Unit
Factory reset
Invert Set
Option Set
Dimmer Set
projector as the master and others are Slaves. It's advised that the
st
3rd LEVEL
Short :1-486
Standard :1-483
Extended :1-468
Really Reset?
Really Reset?
Really Reset?
Really Reset?
Really Reset?
Short 27 CH
Standard 30 CH
Extended 45 CH
View Channel
Normal timeout
Hold Last
Display Mode
Display Inv.
Language Set
Celsius
Fahrenheit
Factory reset ?
Zoom Inv.
CYM Inv.
CTO Inv.
Gamma Curve
1200/2400/4800/10000/1200
LED Ref. Rate
9
4th LEVEL
Confirm/Cancel
Confirm/Cancel
Confirm/Cancel
Confirm/Cancel
Confirm/Cancel
001 Strobe
...
Off Delay
OnAlways
Invert OFF
Invert ON
English
Chinese
Confirm/Cancel
OFF/ ON
OFF/ ON
OFF/ ON
Gamma 2.0/2.2/2.4/2.6
0/15000/20000/25000Hz
5th LEVEL