Table of Contents
Advertisement
€Q Using Eye Control
Keep looking at the focusing
point you want to select and
press the shutter button halfway.
* The < ¥>
icon lights in the
viewfinder.
* The selected focusing point lights
and achieves focus.
Take the picture.
ir * If the camera fails to detect which focusing point you are looking at, the < HJ] >
icon in the viewfinder will blink and automatic focusing point selection will take
i
effect. (page 46)
4
* If Eye Control does not work well, check if you are using the correct CAL No.
and see "Eye Control Calibration and Operation Tips" on page 50.
Eye Control Servo AF
When you use Eye Control in the Al Servo AF mode (or Al Focus AF set to
Al Servo AF), you can focus a moving subject continuously just by looking
|
at it. This is called Eye Contro! Servo AF.
ii
If the subject you focused with Eye Control starts moving, you can focus
continuously by pressing the shutter button halfway and looking at the next
focusing point the subject moves to.
When you turn off the Eye Control switch, you can use automatic or
manual focusing point selection (=>page 45).
|
53
Advertisement
Table of Contents
