Table of Contents
Advertisement
@ Loading and Unloading Film
Unloading Film
>» When the film starts to rewind, the
ISO
film rewind indicator on the LCD
in
panel will flow from right to left to
indicate that the film is rewinding.
The frame counter also counts down.
Qa:
> The film rewind stops automatically.
Check that the <@> icon on the LCD
panel is blinking, then remove the
je.
film cartridge.
©)
Midroll Rewind
To rewind the film in midroll, follow the procedure below.
Press the <Q > button.
> The film will start rewinding. The
subsequent operation will then be the
same as normal film rewind.
Take out the film cartridge.
¢ Check that the <@> icon on the LCD
panel is blinking, then remove the
film cartridge.
"¥° During film rewind, pressing the <@Qs< > button toggles between high-speed and
low-speed (silent) rewind.
Custom Function C.Fn-1 can alter the rewind speed. (page 96)
Normally, the entire film leader is rewound inside the film cartridge. Custom
Function C.Fn-2-1 can leave out the film leader after film rewind. (>page 96)
25
Advertisement
Table of Contents
