@ Loading and Unloading Film
& In hot and humid environments, do not remove the film packaging until you are
ready to load the film
Fl « If the film is not !oaded properly, the <@> icon will blink on the LCD panel and
the shutter will not work. Reload the film cartridge properly.
«Infrared film cannot be used with this camera.
Checking the Film Speed
The camera reads the film cartridge's DX code and sets the film speed
automatically within ISO 25 - 5000.
* Set the Command Dial to a Creative Zone mode.
Press the <FuNc. > button and
move the <p> arrow to <|ISO> on
the LCD panel.
» The film speed will appear on the
LCD panel.
Ail If you want to set a film speed different from the DX-coded film speed or if the
film cartridge is not DX-coded, see "Setting the ISO Film Speed" on page 79.
C.Fn-3-1 can prevent the film speed from being set automatically with the DX
code. (page 96)
24