Table of Contents
Advertisement
@ Loading and Unloading Film
Open the camera back.
* Slide the camera back lever down as
shown by the arrow.
Insert the film cartridge at an
angle as shown in the illustration.
¢ Set the Command Dial to any setting
except < @ip >.
beyond the orange mark, rewind
some of the film back into the
cartridge.
Wrong
(Se
| OO
Close the camera back.
« After checking that the film leader
edge is correctly aligned with the
orange mark, close the camera back.
> The film will advance to frame 1
automatically.
» When the initial film advance ends,
the <@> icon and frame counter of
"+" are displayed on the LCD panel.
23
Advertisement
Table of Contents
