Parts And Components; Before Use - cecotec XQUEEZE BULLET PRO Instruction Manual

1. PARTS AND COMPONENTS

Fig. 1
1. Protective cover
2. Squeezing cone
3. Pulp filter
4. Juice container
5. Main body
6. Lever
7. Upper housing
NOTE:
the graphics in this manual are schematic representations and may not exactly match the
device.

2. BEFORE USE

This appliance is packaged in a way as to protect it during transport. Take the device out
-
of its box and remove all packaging materials. You can keep the original box and other
packaging elements in a safe place. This will help you prevent damage to the device when
transporting it in the future. In case the original packaging is disposed of, make sure all
packaging materials are recycled accordingly.
Make sure all parts and components are included and in good conditions. If there is any
-
piece missing or in bad conditions, contact the official Cecotec Technical Support Service
immediately.
Box content
Xqueeze Bullet Pro lever juicer
-
1 squeezing cone
-
1 pulp filter
-
Instruction manual
-
3. OPERATION
Previous assembly
1. Put the juice container inside the juicer by adjusting the juice outlet spout towards the
front of the device.
2. Put the protective cover inside of the upper housing, this cover only fits in one direction.
The pointed part of the cover should face upwards with the housing open.
ENGLISH
XQUEEZE BULLET PRO
35