Sony FD Trinitron WEGA KV-30HS510 Operating Instructions Manual page 86

Remote Control
Remote control 13 The batteries could be weak. Replace the batteries.
does not operate L_ Check the orientation of the batteries.
L_ Press the V NCllON button. You may have inadvertently pressed the
SA / A_. f: N liON button, which changes the remote control to SAT or
CABLE mode.
J_ Make sure the TV's power cord is connected securely to the wall outlet.
[2 Locate the TV at least 3-4 feet away from fluorescent lights.
Cannot change channels L_ If you are using the TV to change channels, first press the IV U NCION
with the remote control button.
L_ If you are using another device to change chal-a_els, be sure you have not
inadvertently switched your TV from the channel 3 or 4 setting. Use the
C_J_;J;Jel ix option to "fix" the channel based on the hookup you used (see
page 72).
_ If you are using another device to change channels, be sure to press the
U NCI 0N button for that device. For example, if you are using your cable box
Remote control L_ If you replaced the batteries to the remote recently, the code numbers for
does not operate non-Sony the video equipment may need to be reset.
video equipment L_ There may be more than one code for the equipment that you are
attempting to operate.
L_ There is a p_sibility that some non-Sony equipment cannot be operated by
your Sony TV remote.You may need to use the equipment's original
remote control.
Channe_
Cannot receive upper J Change the CaMe option to Off(see page 72).
channels (UHF) when _ Use Auto _rog a_m in the Channel Menu to add receivable channels that are
us!ng an ante_a ....................... not presently !n the TVIs memory (see page 72): ...................................................
TV is fixed to one channel L_ Use Auto Prog am in the Channel Menu to add receivable channels that are
not presently in the TV's memory (see page 72).
13 Check your Channel Fix settings (see page 72).
Cannot receive any L_ Use Aut Prog am in the Channel Menu to add receivable channels that are
channels when using not presently in the TV's memory (see page 72).
cable TV 13 Make sure the Cable option is set to On in the Channel Menu (see page 72).
Cannot receive or select L_ Use Auto Pro9 am in the Chmmal Menu to add receivable TV channels that
channels are not presently in TV memory (see page 72).