_lf
4:3 Defaultis setto
anythingbut Off,the WideMode
settingchangesonlyfor the
currentchannel,When you
changechannels(or inputs),
Wide Mode is automaticalIy
replaced with the 4:3 Default
setting.Toretain the current
Wide Mode settingaschannels
andinputsare changed,set4:3
Defaultto Off,
4:3 Default
Wide Zoom
Select to enlarge the 4:3 size picture, while
Select the default
the upper and lower parts of the picture are
Screen Mode to
condensed
to fit the wide screen.
use for 4:3 sources N mai
mode.
I-ull
Select to enlarge the 4:3 picture
horizontally
only, to fill the wide screen.
Zoom
Select to enlarge the 4:3 picture
horizontally
and vertically
to an equal
aspect ratio that fills the wide screen.
Off
Select to continue
using the current Wide
Mode setting when the channel or input is
changed.
Ve tical Cener
Allows you to move the position
of the picture up and
down in the window.
(Available only in Wide Zoom and
Zoom modes.)
Move the joystick 4_or 4 and press @ to cho_e
a
correction
between
+15 and -15 (Zoom mode), and +5 and
-5 (Wide Zoom mode).
Ve tical Size
Allows you to adjust the vertical size of the picture.
(Available only in Wide Zoom and Zoom modes.)
Move the joystick _ or 4 and press @ to cho_e
a
correction
between
+7 and -7.