Sony FD Trinitron WEGA KV-30HS510 Operating Instructions Manual page 14
Fd trinitron wega
Hide thumbs
Also See for FD Trinitron WEGA KV-30HS510:
- Operating instructions manual (94 pages) ,
- Supplementary manual (1 page) ,
- Service manual (191 pages)
Table of Contents
Advertisement
Can accommodate
a copy-protected
digital coPa_ection (ttDCP*)
to other devices
VDEO
(such as digital
set-top boxes) that have compatible
interfaces.
The DVI-HDTV
AUD0 _?/
input terminal
is compliant
with the EIA-861 standard
and is not intended
for use
{VIDO
H/
with personal
computers.
See the instruction
manual
that came with your
equipment
for details about connecting
and using it with the TV.
1_ S VD0
N "1/3
Connects
to the S VIDEO OUT jack of your VCR or other video equipment
that has
S VIDEO. S VIDEO provides
better picture quality than either composite
video ([3)
or VHF/UHF
(_)) connections.
i_ VDEO _ 1/3/4
Connect
to the composite
A/V output
jacks on your VCR or other video
V D O/L(MONO}
component.
A fourth component
A/V input jack (VIDEO 2) is located on the front
ADIO _
panel of the TV. This video connection
provides
better picture quality than the
VHF/UHF
(_91) connection.
i4_ MONrIO OU]
Lets you record the program
you are watching
to a VCR. When two VCRs are
connected,
you can use the TV as a monitor
for tape-to-tape
editing
(not available
with 480p, 720p, or 1080i when the input is set to VIDEO 5 or 6).
iSJ A DO 0
{VA]l- X/
Connects
to the left and right audio input jacks of your audio or video equipment.
L (MONO)R
You can use these outputs
to listen to your TV's audio through
your stereo system.
[6_ HD/DVD_ 56
Connect
to your DVD player's
or digital set-top box's component
video (Y, PB, PR)
{080i/20p1480_/4%1i)
and audio (L/R) jacks. Component
video provides
better picture
quality than [2_,
iTj AX
Auxiliary
RF input that connects
to your antePa_a, CATV cable, or cable box output
jack. This is conveuient
if you are using two VHF/UttF
sources (antePa_a, CATV
cable, or cable box). For details, see pages 16 to 19.
iSj 0 CONV I_
Connects
to your cable box input jack. This VHF/UHF
output
jack lets you set up
your TV to switch between
scrambled
chapa_els (coming through a cable box) and
up,scrambled
cable chapa_els. Use this jack instead of a splitter to get better picture
quality when you need to switch between
scrambled
and unscrambled
cable
channels.
For details, see pages 18 to 19.
[9_ VHt:/UHt-
Primary
RF input that connects
to your VHF/UHF
antePa_a or cable.
il O,CO_IRO _S
Allows the TV to receive (IN) and send (OUT) remote control signals to other Sony
IN/OU]
infrared-controlled
audio or video equipment
that has the CONTROL
S function.
* High-bandwidth Digital Content Protection
Advertisement
Table of Contents
