Dure: Operation: 5: 6C5C465 6655.0. Ro - Kenwood TH-28A Instruction Manual

CROSS BAND OPERATION
The sub band must be activated for Cross Band
operation.
1 Press the BAND key and select the sub band.
2 Set the receive frequency using the Tuning control
or keypad keys 0 to 9. (Example: when the receive
frequency is 438.100 MHz for the TH-28A/E)
a Pe mir
: oe ~ (LIL
B Apo
3 Press the BAND key.
4 Set the transmit frequency using the Tuning control
or keypad keys 0 to 9. (Example: when the transmit
frequency is 145.660 MHz for the TH-28A/E)
5 Press the F key, then the BAND key.
The Cross Band indicator lights on the LCD, and the
receive frequency is displayed. In this example,
438.100 is displayed.
Lda a
a « (LOLS
8B APO
You can change this receive frequency with the
Tuning control.
o
Pressing the PTT allows you to transmit on VHF
band.
Perform Cross band Operation With Memory
Channel
1 You must set the sub band frequency for the
memory receive frequency, and the main band
frequency for the transmit frequency.
2 Select the desired memory channel.
51