Kenwood TH-28A Instruction Manual page 31

8 DTMF Memory
You can store 10 DTMF telephone numbers up toa
maximum of 15 digits long in memory.
Storing DTMF Codes
1 Press the M key, then press the BAND key to select
the DTMF code entry mode.
2 Enter the DTMF code on the keypad
Pe |
am
fasted
8 Aro
3 Press the MR key after entering the DTMF code.
6
Select the channel (0~9) where you want to store
the DTMF code and press the key for that channel.
The DTMF code is stored and the previously
displayed frequency reappears.
If you enter the wrong number, press the VFO key to
start over from step 1.
To stop during entry, press the PTT switch. The
previously displayed frequency appears on the
display.
Recalling Stored DTMF Codes in Receive Mode
Press and hold the F key for longer than one
second, then press the BAND key.
Press a number key (O~9). The corresponding
stored DTMF code is displayed.
oe
ER |
--[J..
8 APO
31