Table of Contents
Advertisement
Quick Links
SUMAKE
Free Type
Standard Nozzle
Option Nozzle
Capacity Of Cup
Air Consumption
Air Inlet (NPS)
Air Hose (NPS)
Air Pressure
Net Weight
SUMAKE INDUSTRIAL CO., LTD
4F,NO.351,Yangguang St.,Neihu District TAIPEI, TAIWAN, ZIP:114-91
Gravity Air Spray Gun
W/600cc Plastic Cup
Gravity
1.4 mm
1.2 mm, 1.6mm, 1.8mm
0.6 L
9.9-13.1 CFM (280-370 L/min)
1/4" (6.35 mm)
3/8" (10 mm)
29-43psi (2.0-3.0 kg/cm²)
0.99 lbs (0.45 kg)
PNEUMATIC TOOLS
SS-400G
Noise and Vibration:
Vibration
0.3 m/s²
Uncertainty
K= 1.5 m/s
Noise
Sound Pressure Level
: 86 dB(A)
Sound power level
: 97 dB(A)
Uncertainty
²
K= 3dB
Remark
Please always
wear ear
protector at
environment
noise level > 80
dB(A) due to
risk of impaired
hearing!
SS-400G-S-1701A-ITF
Advertisement
Table of Contents
Related Manuals for Sumake SS-400G
Summary of Contents for Sumake SS-400G
- Page 1 Air Hose (NPS) 3/8” (10 mm) risk of impaired Uncertainty Uncertainty Air Pressure 29-43psi (2.0-3.0 kg/cm²) hearing! ² K= 1.5 m/s K= 3dB Net Weight 0.99 lbs (0.45 kg) SUMAKE INDUSTRIAL CO., LTD 4F,NO.351,Yangguang St.,Neihu District TAIPEI, TAIWAN, ZIP:114-91 SS-400G-S-1701A-ITF...
- Page 2 DECLARATION OF CONFORMITY SUMAKE INDUSTRIAL CO., LTD. 4F, No. 351, Yangguang St., Neihu District, Taipei City, Taiwan declare in sole responsibility that the equipment Equipment： GRAVITY AIR SPRAY GUN W/600cc PLASTIC CUP Model/ Serial No.： SS-400G to which this declaration applies, complies with these normative documents: Machinery Directive: 2006/42/EC ...
- Page 3 OPERATION INSTRUCTIONS SPECIFICATION: ▉ Fluid orifice SS-400G: 口 1.2mm 口 1.4mm 口 1.6mm 口 1.8mm SS-400S: 口 1.2mm 口 1.4mm 口 1.6mm 口 1.8mm ▉ Pressure required ………………………………… 29 – 43 psi (2.0 - 3.0 kg/cm²) ▉ Air Consumption ………………………………….. 9.9 - 13.4 cfm (280 - 380 L/min) ▉...
- Page 4 SS-400G AIR SPRAY GUN RTS LIST No. Parts No. Description Q'ty No. Parts No. Description Q'ty 400G-01 Air Cap Set 400G-13 Air Valve Shring 400G-02 Fluid Nozzle 400G-14 Fluid Adj. Guide 400G-03 Needle Packing Set 400G-15 Fluid Needle Set 400G-04...
- Page 5 SPRAY GUN Original instructions SUMAKE Industrial Co. Ltd.
- Page 6 The tool has been manufactured in conformity with the instruction of EU machine directive. The EU mark will be considered void in the event of inexpert repairs, the use of non-original parts and in case of non-observance of the safety instructions in the user’s manual. Possible direct or indirect consequential damages are not the responsibility of SUMAKE Industrial co., Ltd. General safety rules: Watch the tool at all times when in use.
- Page 7 Safety precautions for repetitive motions hazards 1. When using the tool, the operator may experience discomfort in the hands, arms, shoulders, neck, or other parts of the body. 2. While using the tool, the operator should adopt a comfortable posture. Maintain secure footing and avoid awkward or off-balanced postures.
- Page 8 General preparation and connection: Before connecting the air hose, apply 4 to 5 drops of SAE#10-20 spindle oil at the air inlet. Also, every 3 to 4 hours of operation, oiling is necessary. Twist Teflon thread tape to ensure a proper seal air inlet. Then tighten the air coupler into air tool. The supplied compressed air must be clean and dry, with the appropriate oil mist.
Need help?
Do you have a question about the SS-400G and is the answer not in the manual?
Questions and answers