Important Safeguards - Beast Blend B6 HEALTH BLENDER User Manual

IMPORTANT SAFEGUARDS

READ ALL INSTRUCTIONS AND IMPORTANT
SAFEGUARDS TO AVOID THE RISK OF SERIOUS
INJURY.
FOR HOUSEHOLD USE ONLY
WHEN USING ELECTRICAL APPLIANCES,
ALWAYS FOLLOW BASIC SAFETY PRECAU-
TIONS, INCLUDING THE FOLLOWING:
• To reduce the risk of electric shock, the BEAST® MINI
BLENDER has a polarized plug (one prong is wider than
the other). This plug will fit into a polarized outlet only one
way. If the plug does not fit fully into the outlet, reverse the
plug. If it still does not fit, contact a qualified electrician to
install the proper outlet. DO NOT modify the plug in any way.
• To protect against the risk of electrical shock, do not put
cord, plug, or base in water or any other liquid.
• Extension cords are not recommended for use with this
product.
• DO NOT abuse the power cord. Never carry the appliance
by the power cord or pull on it to disconnect from the
electrical outlet. Instead, grasp the plug itself and pull to
disconnect.
• DO NOT operate the BEAST® MINI BLENDER with a
damaged cord or plug, or after it has been dropped or
damaged in any manner. The BEAST® MINI BLENDER has
no serviceable parts. Email customerservice@thebeast.com
if you have any questions or concerns.
• DO NOT let the power cord hang over the edge of a counter
or touch hot surfaces, such as the stove top. Do not place
near a hot gas or electric burner.
TO REDUCE THE RISK OF FIRE, ELECTRIC
SHOCK, OR PERSONAL INJURY AND/OR PROP-
ERTY DAMAGE:
• BLADES ARE SHARP! HANDLE WITH CARE. To avoid
injury, do not handle or touch any blade edge. Use caution
and grasp by the Blade Assembly.
• To protect against electrical shock, do not submerge the
appliance or allow the power cord or Blender Base to
come into contact with water or liquids.
• The BEAST® MINI BLENDER has moving parts. Avoid
contact with moving parts. Keep fingers out of the contain-
er and away from the blades.
• To reduce the risk of injury, NEVER operate the BEAST®
5
IMPORTANT SAFEGUARDS
MINI BLENDER without the vessel properly assembled
to the blade housing. DO NOT try to defeat the interlock
mechanism. Ensure that the vessel is properly installed
before operating the appliance.
• Keep hands, hair, clothing, and utensils out of the vessel
while powered on to reduce the risk of severe injury to
persons and damage to the BEAST® MINI BLENDER .
You may use a scraper, or the Beast Vessel Spatula (not
included), but only when the appliance is not running.
• DO NOT operate the BEAST® MINI BLENDER with
a damaged Blade Assembly, if it malfunctions, or has
been dropped or damaged in any manner. The BEAST®
MINI BLENDER Blade Assembly has no serviceable
parts. Return the appliance to BEAST HEALTH, LLC for
examination, replacement, and/or adjustment.
• To reduce the risk of injury, never place the Blade
Assembly on the base without the Blending Vessel prop-
erly attached. Always wait until the motor has stopped
completely before removing the Blending Vessel.
• Remember to TURN THE POWER SWITCH OFF when
the BEAST® MINI BLENDER is not in use, before
assembling or disassembling parts, and before clean-
ing. You will know that it has successfully turned off
when the light goes out. To unplug the BEAST® MINI
BLENDER , grasp the plug and pull from the electrical
outlet. Never pull from the power cord.
• DO NOT remove the Blending Vessel from the Blender
Base while it is operating. Wait until the motor powers
down completely, the blades stop spinning, and the ingre-
dients settle to remove the vessel and then POWER OFF.
• NEVER BLEND HOT INGREDIENTS. Doing so may
cause excessive steam and pressure to build up in the
vessel, resulting in the potential risk of the vessel and
blender base separating and thereby possibly resulting
in personal injury and/or property damage.
• Never operate the unit for longer than one minute. Blade
friction for prolonged periods can cause heat and relat-
ed pressure buildup in a closed vessel, with the danger
of personal injury and/or property damage.
• Ensure the ventilation holes on the rear of the blender
base are kept clean and never obstructed.
• NEVER BLEND CARBONATED INGREDIENTS,
INCLUDING LIQUIDS, OR RISING LEAVENING
IMPORTANT SAFEGUARDS CONTINUE
ON NEXT PAGE
6