Beast Blend B6 HEALTH BLENDER User Manual page 10

How to Use Your B6 Blender
9. Remove the Blade Assembly from the Blending Vessel
by turning the Blade Assembly counter-clockwise until
the Blade Assembly can be removed.
10. Press the Power Switch at rear of Blender Base to
turn OFF power to the unit.
11. Drink blend directly from the Blending Vessel, add the
Vessel Drinking Lid and Carry Cap to take your blend
on-the-go, or use the Storage Lid to blend for later in
the refrigerator.
To clean all parts after each use, follow the below steps.
12. After each use, rinse your Blade Assembly under hot
water. Use the Blade Cleaning Brush (included) to
remove particles of food in and around the blade area,
as well as in the cavity thread area above the gasket
and clean with soap and water. If preferred, after each
use, place Blade Assembly on the top rack of the
dishwasher only. Allow Blade Assembly to completely
dry before re-assembling your Beast Blender.
13. Rinse the Blending Vessels and clean with a kitchen
dish brush, or the Beast Cleaning Brush (not included).
If preferred, place Blending Vessels and Drinking Lids
+ Carry Caps on the top rack of the dishwasher only.
14. Clean Blender Base periodically with a damp towel
or sponge.
15
9
11
OR
12
14
10
OR
13
16