Table of Contents
Advertisement
Beast Blade Assembly
The Beast Blade Assembly is unlike any other personal
blender blade assembly on the market. It is crafted from
Grade 301 Stainless Steel, and filled with electronics - rath-
er than just plastic. The Beast Blade Assembly is safe and
intelligent: our industry-leading electronic interlock system
confirms that the Blending Vessel, Blade Assembly, and
Blender Base are all securely connected before it will begin
blending. Further, the Blade Assembly features our thermal
safety shutoff to monitor internal temperature that avoids the
overheating and blending of hot liquids.
In your hands, you have a Beast.
In order to keep your revolutionary Blade Assembly in top
shape, it is important that you follow our care and cleaning
tips.
After each use, rinse your Blade Assembly under hot
water. Use the Blade Cleaning Brush (included) to remove
particles of food in and around the blade area, as well as
in the cavity thread area above the gasket and clean with
soap and water. If preferred, after each use, place Blade
Assembly on the top rack of the dishwasher only. Allow
Blade Assembly to completely dry before re-assembling
your Beast Blender.
If you use your Beast Blender more than three times per week
(which we highly recommend), we suggest replacing your
Blade Assembly and/or Blending Vessels every 6-12 months.
For a step-by-step guide on how best to take care of and
clean your Beast Blender, scan the code below.
21
Care + Cleaning
CAUTION: Always ensure the product is unplugged from
the electrical outlet before relocating, assembling,
disassembling, or cleaning it.
• Clean the product (as instructed under the "Before Use"
section) immediately after each use.
• Use the Blade Cleaning Brush to remove particles of food
lodged underneath the blades.
• Store the product in a cool, dry place.
• Never remove the gasket from the Beast Blade Assembly.
• Rinse the Blending Vessels and clean with the Beast
Cleaning Brush (if included). If preferred, place Blending
Vessels and Drinking Lids + Carry Caps on the top rack
of the dishwasher only.
• Clean Blender Base periodically with a damp towel or
sponge.
PLEASE NOTE: The white colored components are
susceptible to staining, and should not come in direct
contact with ingredients prone to causing stains, such as:
turmeric, beets, carrots, or other bright colored ingredients.
If these ingredients do come in contact with light-colored
components, immediately follow the cleaning instructions
listed below.
• Rinse the Cloud White accessories under tap water
using a soapy brush or sponge to clean.
• For a deeper wash, follow the cleaning tips above.
• If your Blending Vessel is left for a prolonged period
of time submerged with any of these ingredients, we
recommend scrubbing the stained area with bleach and
allow it to sit overnight.
22
Advertisement
Table of Contents
