Table of Contents
Advertisement
Out-of-Band Mgmt Port
Microsof t Windows Emergency Management Services (EMS) allows for remote
management of a Windows Server OS through a serial port.
Terminal Type EMS
Use this to select the preferred terminal emulation type for out-of-band management.
It is recommended to select [VT-UTF8].
Option
VT100
VT100+
VT-UTF8
ANSI
Bits Per Second EMS
Use this to select the serial port transmission speed. The speed used in the host computer
and the client computer must be the same. Long or noisy lines may require lower
transmission speed. The options include [9600], [19200], [57600] and [115200].
Flow Control EMS
Use this to set the flow control to prevent data loss from buffer overflow. When sending
data, if the receiving buffers are full, a "stop" signal can be sent to stop the data flow. Once
the buffers are empty, a "start" signal can be sent to restart the flow. Hardware flow uses
two wires to send start/stop signals. The options include [None], [Hardware RTS/
CTS], and [Software Xon/Xoff].
Data Bits
Parity
Stop Bits
Description
ASCII character set
Extended VT100 that supports color and function keys
UTF8 encoding is used to map Unicode chars onto 1 or more bytes
Extended ASCII character set
GENOAD8X-2T/BCM
59
Advertisement
Table of Contents
