Advertisement
4. Front and rear panel
(D 1—6, 7/DYN—0/REV2 switches
When in PGM mode, you can use switches 1—0 to
specify 99 different program change messages.
When in EFFECT mode, you can use switches 1—6 to
specify 36 different program change messages, and use
switches 7/DYN--O/REV2 to turn each effect group on or
off independently.
@ x10 switch
To change the tens place of a number, first press this
switch.
@ BYPASS switch
This switch turns bypass on/off.
When bypass is on the LED will light, and none of the
effect groups will affect the sound.
@ PRESET/USER indicator
This indicator tells you whether the effect program
selected on the FX900 is a preset program or a user
program.
($) MEMORY No. display
This displays the memory number of the effect program
selected on the FX900.
© x10 display
This displays the tens place of the program change
message.
AMAA re CH
REMOTE
MODE
FOOT
CONTROL
MIDI
EFFECT
2
1
MERGE
IN
«e
00 O
(D REMOTE jack
Use the included remote cable to connect this jack to the
FX900 REMOTE jack, allowing the FC900 to
communicate with the FX900. Power is also supplied to
the FC900 through this cable.
MODE select switch
This switch selects the operating mode of the FC900.
Depending on whether this is set to PGM or to EFFECT,
the function of the switches will differ as explained in * (1)
1—6, 7D YN—O0/REV2 switches".
@ FOOT CONTROL Jacks
By connecting optional FC7 foot controliers to these
jacks, you can control the values of parameters selected
on the FX900.
( MIDI MERGE IN jack
By connecting another MIDI device to this jack, program
change messages and control change messages
transmitted by that device can select programs and
modify parameters on the FX900. (Only program change
and control change messages will be received at this
jack.)
MIDI messages received here wiil be re-transmitted from
the MIDI OUT of the FX900.
Advertisement
