Advertisement
The
TF-350
is manufacturerd and sold for the purpose of use in factory, laboratory and industrial
business. It is designed for the solder to melt efficiently with hot air. Since the nozzle gets high in
temperature, you must not touch it before its cooling down. And since the removed SMD is still high
in temperature,
you must not touch
it for certain time after the removal.
The
TF-350
will not stop for approx. 20 seconds while the nozzle is cooled down by the air pump
even
if the
stop
button
is pushed.
In the
meantime
you
must
not turn
off the
power
switch.
Otherwise,
it will cause accident due to overheating.
®
9893 Brewers Cout
Sherboume House,
Laurel, MD 20723
Sherboume Drive
S.A.
Tilbrook, Milton Keynes,
U
Pacs, inc,
Tel: (301490 9860
MK7 8HX
www.paceusa.com
1 888 535 PACE (7223)
United Kingdom
Fax: (301)498 3252
Tel: (44) 1908 277666
Fax: (44) 1908 277777
Advertisement
