Power Button; Drive Interface; Kensington Security Slot; Registering Your Wd Product - Western Digital My Book WDBAAH0015HCH User Manual

Power Button

The power button is used to safely power down the unit and avoid data loss or damage
to the unit. The power button only works if WD SmartWare is installed.
Note: After you power off the drive using the power button, if it remains
connected to your computer, you need to press the power button again to
turn it back on. If you disconnected the drive after turning it off, when you
reconnect it to your booted-up computer, it automatically powers on.

Drive Interface

Hi-Speed USB (USB 2.0) supports data transfer rates up to 480 Mb/s. USB 2.0 is
backward-compatible with USB 1.1. Connection to a USB 1.1 port transfers data at USB
1.1 speed (up to 12 Mb/s).
®
Kensington Security Slot
For drive security, this drive is equipped with a Kensington security slot, which supports
a standard Kensington security cable (sold separately). For more information on the
Kensington security slot and available products, visit www.kensington.com.

Registering Your WD Product

Register your WD product to get the latest updates and special offers. You can easily
register your drive using WD SmartWare software, as described in "Registering Your
Drive" on page 40.
Segment
% Filled
Number
<5 (does not
display)
1 5-9
2 10-19
3 20-29
4 30-39
5 40-49
6 50-59
7 60-69
8 70-79
9 80-89
10 >90
MY BOOK ELITE
USER MANUAL
ABOUT YOUR WD DRIVE – 5