Event: time 1695722632.383952, type 1 (EV_KEY), code 360 (KEY_VENDOR), value 0
Event: time 1695722632.383952, -------------- SYN_REPORT ------------
2.4 FAN
A PWM controlled fan with tacho signal can be connected. The supply voltage can be selected by changing a
0-Ohm resistor, the default supply is 12 V.
2.5 CAN
Jaguar supports up to three CAN busses. CAN0 has an on-board transceiver and supports up to 1 MBaud data
rate. CAN1 and CAN2 are available on the Mezzanine connector and require a transceiver on the Mezzanine
board.
JAGUAR SBC-RK3588-AMR User Manual
© Cherry Embedded Solutions GmbH
Table 2.4: Fan supply (bold default)
Resistor
Fan supply
R314
Main supply voltage
R315
12 V
R316
5 V
Table 2.5: Fan mating connector
Manufacturer
Partnumber
JST
PHR-4
FAN
P13
Fig. 2.5: FAN connection
(continued from previous page)
v1.0.1
Page 7