Table of Contents
Advertisement
10.3 Special salt
You can soften water with special
salt.
Pour in special salt
If the special salt refill indicator lights
up, fill special salt into the special salt
storage container immediately before
starting the program. The consumption
of special salt depends on the degree of
water hardness. The higher the degree
of water hardness, the higher the
consumption of special salt.
DANGER!
Cleaner can damage the softening
system.
Only fill the storage container of
▶
the softening system with special
salt for dishwashers.
Special salt for dishwashers can
damage the washing container
through corrosion.
▶ To ensure that overflowed special
salt is rinsed out of the rinsing
container, fill the special salt into the
special salt storage container
immediately before the program
starts.
Unscrew and remove the lid from
1.
the special salt storage container.
When using for the first time: Fill
2.
the storage container completely
with water.
3. Note:Only use special salt for
dishwashers.
Do not use salt tablets. Do not
use table salt.
Pour the special salt into the storage
container.
Fill the reservoir completely with
special salt. The water in the
reservoir is displaced and runs off.
Place the lid on the storage
4.
container and screw it on.
10.4 Switch off the softening
system
If the special salt refill indicator
bothers you, e.g. B. if you use
combined cleaners with salt
substitutes, you can switch off the
special salt refill indicator.
Notice
To avoid damage to the device, only
switch off the softening system in the
following cases: ¡The water hardness
level is maximum
times 21 °dH and you use a
combined cleaner with salt
substitutes. According to the
manufacturer, you can usually only
use combined cleaners with salt
substitutes up to a water hardness
of 21 °dH without adding special
salt.
Softening systemde
29
Advertisement
Table of Contents
