Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Bosch SMS6ECW38M
Summary of Contents for Bosch SMS6ECW38M
- Page 1 Dishwasher SMS6ECW38M [en] User manual...
-
Page 2: Table Of Contents
Table of contents Safety .......... 4 Cutlery drawer ........ 24 General information...... 4 Etagere ........... 24 Intended use........ 4 Folding prongs ....... 24 Restriction on user group.... 4 Extra Clean Zone ...... 25 Safe installation ........ 4 Basket heights........ 26 Safe use ........... 6 Before using for the first time .. 27 Damaged appliance ...... 7 Performing the initial configura- Risk to children ........ 8... - Page 3 Customer Service...... 61 Interrupting programme .... 36 Product number (E-Nr.), produc- Terminate programme.... 37 tion number (FD) and consecut- Switching off appliance .... 37 ive numbering (Z-Nr.) ..... 61 Basic settings........ 38 AQUA-STOP guarantee .... 61 Overview of basic settings ..... 38 Technical specifications.... 61 Changing basic settings.... 40 Information regarding Free and Open Source Software .... 62...
-
Page 4: Safety
en Safety Safety Observe the following safety instructions. General information ¡ Read this instruction manual carefully. ¡ Keep the instruction manual and the product information safe for future reference or for the next owner. ¡ Do not connect the appliance if it has been damaged in transit. Intended use Only use this appliance: ¡... - Page 5 Safety en WARNING ‒ Risk of electric shock! ¡ Incorrect installation is dangerous. ▶ Connect and operate the appliance only in accordance with the specifications on the rating plate. ▶ Always use the supplied power cable for the new appliance. ▶ Connect the appliance to a power supply with alternating current only via a properly installed socket with earthing.
-
Page 6: Safe Use
en Safety Safe use WARNING ‒ Risk of serious harm to health! Failure to comply with safety instructions and directions for use on packagings of detergent and rinse aid products may cause serious harm to health. ▶ Follow the safety instructions and directions for use on the packagings of detergent and rinse aid products. -
Page 7: Damaged Appliance
Safety en WARNING ‒ Risk of tipping! Overfilling the Baskets may cause the appliance to tip up. ▶ Never overfill the Baskets with free-standing appliances. WARNING ‒ Risk of electric shock! ¡ An ingress of moisture can cause an electric shock. ▶ Only use the appliance in enclosed spaces. ▶... -
Page 8: Risk To Children
en Safety ¡ Incorrect repairs are dangerous. ▶ Repairs to the appliance should only be carried out by trained specialist staff. ▶ Only use genuine spare parts when repairing the appliance. ▶ If the power cord of this appliance is damaged, it must be replaced with a special connection cable, which is available from the manufacturer or his Customer Service. - Page 9 Safety en WARNING ‒ Risk of chemical burns! Rinse aid and detergent may cause chemical burns to the mouth, throat and eyes. ▶ Keep children away from detergent and rinse aid products. ▶ Keep children away from the appliance when open. The wa- ter in the interior of the dishwasher is not drinking water.
-
Page 10: Preventing Material Damage
en Preventing material damage Only use the water hoses sup- ▶ Preventing material damage Preventing material dam- plied with the appliance or genu- ine spare hoses. Never re-use water hoses that ▶ have been used before. Preventing material damage Safe installation ¡... -
Page 11: Environmental Protection And Saving Energy
Environmental protection and saving energy en So as not to scratch the finish Change the sensor setting to the de- ▶ on the appliance, do not use fault. sponges with a rough surface or Consumption is reduced. abrasive cleaning agents. → "Sensors", Page 11 To prevent corrosion, do not use ▶... -
Page 12: Efficient Dry
en Installation and connection Sensor setting Description Installation and connection Installation and connec- SE:01 Adjusts the programme tion strength for effective re- moval of food remnants Installation and connection even with low soiling Scope of supply levels. Energy and water consumption are adjusted After unpacking all parts, check for accordingly. -
Page 13: Drainage Connection
Installation and connection en Check the Scope of supply and Drinking water connection the condition of the appliance. Connect your appliance to a drinking Consult the installation instructions water connection. for the installation dimensions re- quired. Installing the drinking water Make the appliance level using the connection height-adjustable feet. - Page 14 en Installation and connection The connection data for the appli- ance can be found on the rating plate. Check that the mains plug is inser- ted properly.
-
Page 15: Familiarising Yourself With Your Appliance
Familiarising yourself with your appliance en Familiarising yourself with your appliance Familiarising yourself with your appliance Familiarising yourself with your appliance Appliance You can find an overview of the parts of your appliance here. Rating plate Rating plate with "E number and FD number" → Page 61. -
Page 16: Controls
en Familiarising yourself with your appliance "Detergent" → Page 31 is added to the detergent Detergent dispenser dispenser. "Bottom basket" → Page 23 Bottom basket Dispenser for special salt Add the special salt to the dispenser for special salt. → "Water softening system", Page 27 Lower spray arm The lower spray arm washes the tableware in the bot- tom basket. - Page 17 Familiarising yourself with your appliance en "Switching on the appliance" → Page 35 ON/OFF button and reset button "Switching off the appliance" → Page 37 "Terminating the programme" → Page 37 "Programmes" → Page 19 Programme buttons Programme sequence display The programme sequence display shows the cur- rent cycle of the appliance, e.g. washing, rinsing or drying.
- Page 18 en Familiarising yourself with your appliance Water supply display Display for water supply "Water softening system" → Page 27 Special salt refill indicator Door opener Opening the appliance door Depending on the appliance specifications...
-
Page 19: Programmes
Programmes en Programmes Programmes You can find an overview of the pro- ning time will change if the rinse aid Programmes grammes that can be selected here. system is switched off or rinse aid Different programmes, which can be needs to be added. found on the control panel of your The consumption values can be appliance, are available depending... - Page 20 en Programmes Programme Programme sequence Additional func- tions Tableware: Reduced noise: → "Additional ¡ Cleaning mixed table- ¡ Pre-Rinse Silence 50 ware and cutlery. functions", ¡ Cleaning 50 °C Level of soiling: Page 21 ¡ Intermediate rinse ¡ Removing common ¡ Final rinse 65 °C household food remnants ¡...
-
Page 21: Information For Test Institutes
Additional functions en Press for approx. 3 seconds. Information for test institutes a The selected programme and the Test institutes are provided with in- additional function will flash. formation for comparability tests, e.g. flashes. according to EN60436. a The programme and the additional These are the conditions for conduct- function are saved. -
Page 22: Features
en Features Additional func- Additional func- tion tion → "Efficient Dry", Page 12 ¡ Switch on with small loads. Half Load ¡ It is recommended adding less detergent Features Features to the detergent dis- penser than for a full You can find an overview of the pos- Features machine load. -
Page 23: Bottom Basket
Features en Press in the levers on the right and Bottom basket left on the outside of the basket. Arrange pans and plates in the bot- tom basket. The basket can then slip down slightly. Raise or lower the basket evenly to Cutlery basket the right level. -
Page 24: Cutlery Basket
en Features Cutlery basket Etagere Arrange cutlery in the cutlery basket, Use the cutlery shelf and space un- always without sorting it and with the derneath for small cups and glasses sharp points downwards. or for large items of cutlery, e.g. cooking spoons or serving cutlery. -
Page 25: Extra Clean Zone
Features en Push the lever forwards and fold Set the slider to ON or OFF. down the prongs . Push in the top basket. To use the prongs again, fold them Cleaning Extra Clean Zone back up. a The prongs audibly click into posi- Limescale and soiling from the dish- tion. -
Page 26: Basket Heights
en Features Place the Extra Clean Zone in the Push in the top basket. top basket and lock in place . Check that the mounts are in the correct position. a The Extra Clean Zone audibly clicks into position . Basket heights Set the baskets at the right height. -
Page 27: Before Using For The First Time
Before using for the first time en "Set the amount of rinse aid to be Before using for the first time Before using for the dispensed." → Page 30 first time "Add detergent" → Page 31. Start the Programme with the Configure the settings for initial start- Before using for the first time highest cleaning temperature without tableware. -
Page 28: Setting The Water Softening System
en Water softening system Water hardness °E Hardness range mmol/l Setting value 39 - 62 Hard 5.5 - 8.9 H:07 Note: Set the water hardness determ- ter hardness: the higher the water ined on your appliance. hardness, the greater the amount of → "Setting the water softening sys- special salt required. -
Page 29: Switching Off The Water Softening System
Rinse aid system en Note: Only use special salt for erally only be used up to a water dishwashers. hardness of 26 °E without adding Do not use salt tablets. special salt. Do not use table salt. ¡ The water hardness is 0 - 8 °E. You do not need to use special Add the special salt to the dis- salt. -
Page 30: Setting The Amount Of Rinse Aid
en Rinse aid system a The display shows . Press the catch on the lid of the dispenser for rinse aid and lift Press repeatedly until . the display shows the value set at the factory r:05. Press repeatedly until the right amount of rinse aid has been set. -
Page 31: Detergent
Detergent en Detergent Description Detergent Detergent Liquid detergent Liquid detergent works faster and is recommen- Find out which detergents are suit- Detergent ded for shorter "Pro- able for your appliance. grammes" → Page 19 Suitable detergents without PreRinse. Sometimes liquid deter- Only use detergents that are suitable gent may leak out despite for dishwashers. -
Page 32: Unsuitable Detergents
en Detergent depending on the combination (4in1, ¡ According to manufacturers, com- 5in1, ...), additional components such bined detergents with salt replace- as glass protection or stainless steel ment substances can only be used cleaner. up to a certain water hardness, According to manufacturers, com- usually 26 °E, without adding spe- bined detergents generally only func- cial salt. -
Page 33: Tableware
Tableware en Add the detergent to the dry deter- Close the lid of the detergent dis- gent dispenser. penser. 50 ml 25 ml 15 ml a The lid clicks into position. If you are using tablets, one is a The detergent dispenser will open enough. -
Page 34: Damage To Glass And Tableware
en Tableware Damage to glass and table- Cause Recommendation ware The water temperat- Select a programme ure of the programme with lower temperat- Avoid damage to glass and table- is too high. ures. ware. After the programme has ended, take glass- Cause Recommendation ware and cutlery out... -
Page 35: Removing Tableware
Basic operation en To save resources, do not pre- Removing tableware rinse tableware under running wa- ter. WARNING Observe the following when arran- Risk of injury! ging tableware: Hot tableware can cause burns to the – Put heavily soiled tableware in skin. -
Page 36: Setting Additional Functions
en Basic operation ¡ You can only change a pro- Setting additional functions gramme when running if you can- You can set additional functions to cel it. complete the washing programme → "Terminate programme", selected. Page 37 ¡ The appliance switches off auto- Note: The additional functions which matically 1 minute after the end of can be used depend on the pro-... -
Page 37: Terminate Programme
Basic operation en Terminate programme To end a programme early or to switch from a programme that has already started, you will need to can- cel it first. Press for approx. ▶ 4 seconds. a All displays light up. a As soon as the displays are off, the display shows "00h:01m"... -
Page 38: Basic Settings
en Basic settings Basic settings Basic settings You can configure the appliance to meet your needs. Basic settings Overview of basic settings The basic settings depend on the features of your appliance. Basic setting Display text Selection Description Water hardness H:04 H:00 - H:07 Set the water softening system to your water hardness. - Page 39 Basic settings en Basic setting Display text Selection Description Tone volume SL:02 SL:00 -SL:03 Adjustment of tone volume. Level "SL:00" switches the signal tone off. If the Eco drying function is activ- ated, the end of the programme is not indicated by an audible signal tone.
-
Page 40: Changing Basic Settings
en Home Connect Basic setting Display text Selection Description Remote Start rc:01 rc:00 - rc:02 Activate or deactivate → "Remote Start ", Page 41. The following settings are possible: ¡ With the setting "rc:00", the func- tion is permanently deactivated. ¡ With the setting "rc:01", the func- tion can be selected via the button. -
Page 41: Home Connect Quick Start
Home Connect en The Home Connect app guides you With the help of the Home Connect through the entire login process. Fol- App scan the QR code. low the instructions in the Home Con- nect app to configure the settings. Tips ¡ Please consult the documents sup- plied by Home Connect. -
Page 42: Remote Diagnostics
en Cleaning and servicing Press . ¡ Security certificate of the Wi-Fi ▶ communication module (to ensure If you open the appliance door, the a secure data connection). function is automatically deactiv- ¡ The current software and hardware ated. version of your appliance. button lights up. -
Page 43: Self-Cleaning Of The Appliance
Dishwasher Care and Ma- ance to malfunction. To avoid such chine Cleaner for Dishwashers online faults and reduce odours, we recom- at https://www.bosch-home.com/ mend cleaning your appliance at reg- store or from customer service. ular intervals. Machine Care is a programme which... -
Page 44: Filter System
en Cleaning and servicing a Once the programme has ended, Running Machine Care the indicator for Machine Care Run the Machine Care programme if goes out. the indicator for Machine Care lights up on the control panel or if advised Filter system to do so by the display. -
Page 45: Cleaning Spray Arms
Cleaning and servicing en Pull down the micro filter to re- Cleaning spray arms move. Limescale and soiling in the dish- washing water may block the nozzles and bearings on the spray arms. Clean the spray arms regularly. Unscrew the upper spray arm and pull down to remove ... -
Page 46: Troubleshooting
en Troubleshooting Troubleshooting Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshoot- Troubleshooting ing information before contacting after-sales service. This will avoid unneces- sary costs. WARNING Risk of electric shock! Incorrect repairs are dangerous. Repairs to the appliance should only be carried out by trained specialist ▶... -
Page 47: Error Code / Fault Display / Signal
Troubleshooting en Fault Cause Troubleshooting Appliance door opens too Door is not correctly adjus- Adjust the appliance door as de- ▶ wide at the end of the pro- ted. scribed in the installation instruc- gramme. tions. The door gap must be at least 70 mm - 100 mm. - Page 48 en Troubleshooting Fault Cause Troubleshooting E:32-00 will light up altern- Remove the filter from the supply ately or indicator for water hose supply lights up. Clean the filter. Re-insert the filter in the supply hose. Screw the water connection back Check the water connection for leaks.
-
Page 49: Washing Results
Troubleshooting en Fault Cause Troubleshooting A different error code ap- A technical fault is present. Press . pears in the display window. Unplug the appliance or switch off the fuse. E:01-00 to E:90-10 Wait at least 2 minutes. Insert the mains plug of the appli- ance in a socket or switch on the fuse. - Page 50 en Troubleshooting Fault Cause Troubleshooting Tableware is not dry. Use a different combined detergent with a better drying performance. Extra Dry not activated to im- Activate Extra Dry. ▶ prove drying performance. Tableware removed too Wait until the programme ends. early or drying process not Only remove tableware 30 minutes yet ended.
- Page 51 Troubleshooting en Fault Cause Troubleshooting Remnants of food on table- Filters are soiled. Clean the filters. ▶ → "Cleaning filters", Page 44 ware. Filters are inserted incor- Insert the filters properly. → "Filter system", Page 44 rectly and/or not engaged. Engage the filters. Washing programme selec- Select a more intensive washing ▶...
- Page 52 en Troubleshooting Fault Cause Troubleshooting Water marks on plastic Due to laws of physics Select a more intensive pro- ▶ parts. droplet formation on plastic gramme. → "Programmes", Page 19 surfaces is unavoidable. After drying water marks are Position tableware at an angle. ▶...
- Page 53 Troubleshooting en Fault Cause Troubleshooting Tea residue or lipstick marks Washing temperature is too Select a programme with a higher ▶ on tableware. low. washing temperature. → "Programmes", Page 19 Too little detergent is being Use a suitable "Detergent " ▶ → Page 31 and follow the manufac- used or is unsuitable.
- Page 54 en Troubleshooting Fault Cause Troubleshooting Plastic parts are discol- Washing temperature is too Select a programme with a higher ▶ oured. low. washing temperature. → "Programmes", Page 19 Tableware has been pre- Only remove large remnants of food ▶ cleaned too intensely. The and do not prerinse tableware.
-
Page 55: Home Connect Problem
Troubleshooting en Fault Cause Troubleshooting Rust spots on cutlery. Cutlery is not sufficiently Use rust-resistant tableware. ▶ rust-resistant. Knife blades are often more severely af- fected. Cutlery may also rust if Do not wash rusting items. ▶ washed together with rust- ing items. -
Page 56: Information On Display Panel
en Troubleshooting Information on display panel Fault Cause Troubleshooting Add "Special salt" → Page 28. Special salt refill indicator Insufficient special salt. ▶ lights up. Sensor does not detect spe- Do not use special salt tablets. ▶ cial salt tablets. Refill indicator for special Water softening system is Setting the water softening system ▶... -
Page 57: Mechanical Damage
Troubleshooting en Fault Cause Troubleshooting → "Terminate programme", Programme starts automat- You did not wait until pro- ▶ ically. gramme ended. Page 37 Appliance stops during the Appliance door is not closed Close the appliance door. ▶ programme or cuts out. properly. Power and/or water supply Check the power supply. - Page 58 en Troubleshooting Fault Cause Troubleshooting Knocking or rattling noise. Load the appliance with more table- ▶ ware. Light items of tableware Position light items of tableware se- ▶ move about during the wash curely. cycle.
-
Page 59: Clean Wastewater Pump
Transportation, storage and disposal en Insert the pump cover and press Clean wastewater pump down . Large remnants of food or foreign bodies can block the waste water pump. As soon as the rinsing water no longer drains properly, the waste water pump must be cleaned. -
Page 60: Protect Appliance From Frost
en Transportation, storage and disposal Protect appliance from frost Disposing of old appliance If there is a risk of frost where the ap- Valuable raw materials can be re- pliance will be standing, e.g. in a holi- used by recycling. day home, empty the appliance com- pletely. -
Page 61: Customer Service
Customer Service en from water damage, the appliance Customer Service Customer Service must be connected to the power supply. If you have any queries, are unable to Customer Service ¡ The liability guarantee is valid for rectify faults on the appliance your- the service life of the appliance. -
Page 62: Information Regarding Free And Open Source Software
(0.5 bar) spective appliance. ¡ Max. 1 MPa (10 bar) Declaration of Conformity Inlet rate Min. 10 l/min Robert Bosch Hausgeräte GmbH Water temperature Cold water. hereby declares that the appliance Hot water max.: 60 °C with Home Connect functionality Capacity 13 place settings... - Page 63 Technical specifications en 5 GHz WLAN (Wi-Fi): For indoor use only.
- Page 64 Expert advice for your Bosch home appliances, help with problems or a repair from Bosch experts. Find out everything about the many ways Bosch can support you: www.bosch-home.com/service Contact data of all countries are listed in the attached service direct- ory.