Firebox V200 Back Panel - Watchguard Firebox V200 Hardware Manual

Firebox V200 Back Panel

The back panel of a Firebox V200 security appliance includes the
following:
Do not connect any Firebox V200 appliance to a source of power that
supplies the wrong voltage. Doing so will damage the appliance and void
the warranty.
Hardware Guide
Filter
Reserved for future use.
AC input module
Enables you to use the supplied power cords to connect the
appliances two power supplies to a 100 to 240VAC (50/60Hz)
power source. The power supply switch shuts off power to the
appliance. Do not shut off power to the appliance unless you first
complete a system shutdown in the CLI or Vcontroller. For more
information on completing a system shutdown, see the Firebox
Vclass User Guide.
Firebox V200 Back Panel
N
OTE
5