Watchguard V10 Hardware Manual page 13

In the event of a power failure, this security appliance, if left connected to
the power source, automatically restarts itself after electrical power has
been restored. You do not have to unplug and then reconnect the appliance
to the power source.
The V60 and V80 models
The front panels of both Firebox V60 and V80 security appliances contain
the features shown in the following illustration.
Hardware Guide
Power
Illuminates when the appliance has been turned on.
Alarm
Illuminates when certain alarms are triggered. For more
information on alarms, see the System Administration Guide.
Admin
Illuminates when a system administrator is connected to the
appliance by means of the Vcontroller or the WatchGuard CLI.
Ready
Blinks when the appliance is powering up. Illuminates when the
appliance is ready for network traffic.
N
OTE
Front and Back Views
5