Table of Contents
Advertisement
SAMSUNG
01 USING THE REMOTE CONTROL
II
Power
II
~ (Mute)
II
cg]
(Source)
■
SOUND MODE
By pressing the button, you can select the desired audio
mode such as Surround, Game, Standard, Adaptive sound.
II
■
II
Ill
m
II
Press to select a source connected to
the Sound bar.
*
Bluetooth PAIR
Switch the Soundbarto Bluetooth
pairing mode.
Up/ Down/ Left/ Right
MI
(Play/ Pause)
CH LEVEL
II
II
II
i
(info)
Press to display information about the active function or
the codec available.
In BT mode, it displays the connected device (when pairing
is complete) or"BTready" (when pairing is required).
VOLUME
WOOFER (BASS) LEVEL
Push the button up or down to adjust the level of the
woofer(bass).
By pressing the button, you can adjust the volume of the each speaker such as Center level. Side level, Wide
level, Front Top level, Rear level, Rear top level.
•
Available Rear level settings (Rear level, Rear top level) may_vary depending on the specification of the
compatible (with the Soundbar) surround speaker.
•
CH LEVEL specifications may differ with the respective model.
©
(Sound Control)
By pressing the button, you can set the audio function such as Spacefit sound, AVA, Voice enhance mode,
Night mode, Sync, Surround speaker mode, Virtual. The desired settings can be adjusted using the Up/
Down buttons.
•
Available Rear speaker mode settings may vary depending on the specification of the compatible (with
the Soundbar) surround speaker.
•
Sound control specifications may differ with the respective model.
TONE CONTROL
By pressing the button, you can adjust the volume of the treble or bass sound. The desired item can be
adjusted using the Up/ Down buttons.
02 INSTALLING THE SOUNDBAR
Installation Precautions
•
Install on a vertical wall only.
•
Do not install in a place with high temperature or humidity.
•
Verify whether the wall is strong enough to support the product's
weight. If not, reinforce the wall or choose another installation point.
•
Purchase and use the fixing screws or anchors appropriate for the kind
of wall you have (plaster board, iron board, wood, etc.). If possible, fix
the support screws into wall studs.
Installing the Sound bar above a TV Stand
Rubber-Foot
NOTE
•
Make sure the Soundbar is placed on a flat and solid surface.
•
Purchase wall mounting screws according to the type and thickness of
the wall you want to mount the Soundbar on.
-
Diameter: MS
-
Length: 1 3/8 inches (35 mm) or longer recommended.
•
Connect cables from the unit to external devices before you install the
Soundbaron the wall.
•
Make sure the unit is turned off and unplugged before you install it.
Otherwise, it may cause an electric shock.
•
Insufficient gap from the TV may cause voice recognition and acoustic problems.
•
As illustrated in the image, align the center of the Soundbarwith the center of the TV, carefully place the Soundbaronto the TV stand. At this time, place
the microphone at the front of the stand not to interfere with voice recognition.
•
The illustration above may differ with the model.
Advertisement
Table of Contents
