Table of Contents
Advertisement
03 USING THE SOUNDBAR REMOTE CONTROL
Inserting Batteries before using the Remote Control (AAA batteries X 2)
Slide the back cover in the direction of the arrow until it is completely removed. Insert 2 AAA batteries
(1.5V) oriented so that their polarity is correct. Slide the battery cover back into position.
How to Use the Remote Control
1
2
4
5
6
7
SOUNDBAR
1
Power
3
2
Source
8
3
9
Bluetooth PAIR
10
4
11
Mute
12
5
13
SOUND MODE
6
CH LEVEL
Turns the Soundbar on and off.
• Auto Power Down Function
The unit turns off automatically in the following situations:
• In D.IN / HDMI / Wi-Fi / BT mode if there is no audio signal for
18 minutes.
Press to select a source connected to the Soundbar.
Switch the Soundbar to Bluetooth pairing mode. Press the button and
wait for the "BT PAIRING" screen to connect to a new Bluetooth device.
Press the
(Mute) button to mute the sound.
Press it again to unmute the sound.
By pressing the button, you can select the desired audio mode such as
Surround, Game, Standard, Adaptive sound.
• Standard
Outputs the original sound.
• Surround
Provides a wider sound field than standard.
• Game
Provides stereoscopic sound to immerse you in the action while
gaming.
• Adaptive sound
Analyzes the content in real time and automatically provides the
optimal sound field based on the characteristics of the content.
By pressing the button, you can adjust the volume of the each speaker
such as Center level, Side level, Wide level, Front Top level, and Rear
level.
• To control the volume of the each speaker select Center level, Side
level, Wide level, or Front Top level in Sound Settings, and then adjust
the volume between -6~+6 by using the Up/Down buttons.
• If Surround Speakers are connected, select Rear level and then use
the Up/Down buttons to adjust the volume within a -6 to +6 range.
• CH LEVEL specifications may differ with the respective model.
ENG - 6
Hide quick links:
Advertisement
Table of Contents
