Advertisement
| Recalling Stored Measurement Values
=
Measurements can be recalled after measurement is completed or after the power has been
switched off.
1. Press the Memory/Recall button.
e After the memory number has been displayed for
2 seconds, the latest record will be displayed.
Panasonic
ev-suos
SYS.
b DIA.
Pulse
/min.
HD aT
(
(4
OFF/ON
©)
START
2. To display previous data, press the Memory/Recall
button again.
e Each time you press the Memory/Recall button
readings will be displayed, starting with the next most
recent readings.
Do not press the Memory/Recall button for
approximately 3 seconds or longer as all data in
memory will be erased.
d ES
<
Panasonic
ev-suos
ge 82 62 a
OFF/ON
START
3. Press the Off/On Start button to cancel
OFF/ON
measurement value recall.
e The power will switch off automatically after
approximately 30 seconds.
To erase all measured values stored in memory:
(1) Press the Memory/Recall button to recall stored measurement values.
(2) Press the Memory/Recall button again and hold it pressed until the measurement
values disappear (approximately 3 seconds or more).
*It is not possible to erase single measurement values.
(3) The M mark and - - will be shown when all data is deleted.
Advertisement
