Panasonic Digital Palmcorder PV-DV52 Operating Instructions Manual page 38

• • - • i -
The original sound can be replaced with
new sound using the built-in Palmcorder
microphone.
-Before you begin
• Turn on the Palmcorder.
• Insert a pre-recorded tape to be
dubbed.
The AUDLO-REC setting in CAMERA
MENU mode should be as follows:
The original sound is recorded
12 bit on ST (Stereo) 1, and the new
sound will be recorded on ST
(Stereo) 2.
The original sound is replaced
16 bit with the new sound.
Built-in Microphone
JOG KEY
3MENU--
2PLAY
2PAUSE
• Select 12 bit if you do not want the
original sound to be completely replaced
during an audio dub.
• If you dub over a tape which has both
12 bit and 16 bit audio recordings on it,
keep in mind that the original 16 bit audio
portion will be completely replaced.
Set POWER to VCR.
Press • (PLAY). Then press
II (PAUSE) where you want dubbing to
begin.
Press MENU to display the VCR mode
menu screen.
Rotate JOG KEY to selectr_,
then press JOG KEY to display the
VCR REC MODE menu screen.
Rotate JOG KEY to select _IlT_
r_'llT_, and then press JOG KEY to
select ON.
• The Palmcorder will go to Stand By
mode, and "A.DUB" flashes in the EVF
or the LCD monitor.
38