Table of Contents
Advertisement
Search Codes
Cable/Satellite
Search Codes Function:
1) Slide the first 2-Way Mode Selector switch to CATV.
2) Press the TV POWERand RETURN+buttons. Hold for at least three seconds and release.
3) Press TV POWER,see if the CATV or Satellite box responds.
4) If there was a response, press RETURN+.The operating codes are now set. If there was no
response, repeat Step 3. If you repeat Step 3 a total of 52 times without a response, use the
remote control which came with the equipment.
5) Press RETURN+to exit.
VCR Search Codes Function:
1) Slide the first 2-way selector switch to '*TV" and the other 2-way selector switch to '*VCR".
2) Press the VCR POWERand RETURN+buttons. Hold for at least three seconds and release.
3) Press VCR POWER,see if the VCR responds.
4) If there was a response, press RETURN+.The operating codes are now set. If there was no
response, repeat Step 3. If you repeat Step 3 a total of 80 times without a response, use the
manufacturers
remote control which came with the VCR.
5) Press RETURN+to exit.
DVD Player Search Codes Function:
1) Slide the first 2-way selector switch to "TV" and the other 2-way selector switch to "DVD".
2) Press the DVD POWERand RETURN+buttons. Hold for at least three seconds and release.
3) Press DVD POWER,see if the DVD player responds.
4) If there was a response, press RETURN+.The operating codes are now set. If there was no
response, repeat Step 3. If you repeat Step 3 a total of 30 times without a response, use
the manufacturers
remote control which came with the DVD player.
5) Press RETURN+to exit.
49
Advertisement
Table of Contents
