Search Codes - JVC PD-42V475 Service Manual

Search Codes

Cable/Satellite Search Codes Function
1) Slide the first 2-Way Mode Selector switch to CATV.
2) Press the P
OWER
3) Press the P
OWER
4) If there was a response, press R
response, repeat Step 3. If you repeat Step 3 a total of 80 times without a response, use
the remote control that came with your equipment.
5) Press R + to exit.
ETURN
VCR/DVD Search Codes Function
1) Slide the first 2-way selector switch to "TV" and the other 2-way selector switch to "VCR" or
"DVD".
2) Press the VCR or DVD P
release.
3) Press the VCR or DVD P
4) If there was a response, press R
response, repeat Step 3. If you repeat Step 3 a total of 80 times for the VCR (40 times for
the DVD player), and there is no response, use the remote control that came with your
equipment.
5) Press R + to exit.
ETURN
Remote Programming
and R + buttons. Hold for at least three seconds and release.
ETURN
button on the remote, and see if the cable or satellite box responds.
ETURN
and R
OWER
button, and see if the VCR or DVD responds.
OWER
ETURN
+. The codes are now set. If there was no
+ buttons. Hold for at least three seconds and
ETURN
+. The codes are now set. If there was no
29