Table of Contents
Advertisement
Connections
Connecting to a DVD player
DVD
PLAYER
_1
Illustration of AV-27F803
1) Connect Green cable out from DVD player "Y" Component
Output, in to TV "Y" Component
Input.
2) Connect Blue cable out from DVD player "PB"Component
Output, in to TV "PB"Component
Input.
3) Connect Red cable out from DVD Player "PR"Component
Output, in to TV "PR"Component
Input.
4) Connect White Audio cable out from DVD Left Audio Output, in to TV Left Audio Input 2.
5) Connect Red Audio cable out from DVD Right Audio Output, in to TV Right Audio Input 2.
• Green, blue and red are the most common colors for DVD cables. Some models may vary
colors,
please consult the user's manual for your DVD Player for more information.
• Be careful not to confuse the red DVD cable with the red audio cable. It is best to complete
one set of connections
(DVD or Audio Output) before starting the other to avoid accidentally
switching the cables.
• See page 22 for instructions
on programming
your remote control to operate the basic func-
tions of your DVD player.
• AV-36FS03, AV-32FS03 & AV-27FS03: You may also connect the DVD player to Input 4.
• AV-36F703, AV-32F703, AV-27F703, AV-36F713, AV-32F713, and AV-27F713:
If you use
Input 2 (Component-In)
for the DVD connection, you must set the V2 COMPONENT-IN
on
the initial Setup Menu to "YES" for proper display of the DVD signal.
[]
_
_'
_
INITIAL
J_
SETUP
_PREVIOUS
L A N G U A G E
iiiii_iiii_i! F RA N.
E S P.
CLOSED
CAPTION"
FRONT
PANEL
LOCK
"OFF"
AUTO
SHUT
OFF
"OFF"
XDS
ID
"OFF"
f
V2
COMPONENT--IN
"YES"
QNEXT
PAGE
SELECT
BYDU
OPERATE
BY[][]
EXIT
BY I_'_1_1
NOTE: Progressive DVD Players (players with an output scan of 31.5 KHz) will not work prop-
erly with this television.
16
Advertisement
Table of Contents
