Overload Protection - Miller Trailblazer 302 Diesel Technical Manual

7-5. Overload Protection

2
3
TM-217 454 Page 28
1
Y Stop engine.
.
When a circuit protector opens,
it usually indicates a more seri-
ous problem exists.
1 Supplementary Protector
CB4 (Located On Fuel Tank
Cover)
CB4 protects the stator winding
supplying 24 volt ac output to Re-
mote receptacle RC4. If CB4
opens, 24 volt ac output to RC4
stops.
.
Supplementary protectors
CB1 and CB3 protect the stator
winding supplying 115 volt ac
output to Remote Receptacle
RC4 (see Section 4-9).
Press button to reset.
2 Circuit Breaker CB7
CB7 protects the engine glow plug
circuit. If CB7 opens, the glow plug
does not heat. CB7 automatically
resets when the fault is corrected.
3 Circuit Breaker CB8
CB8 protects the engine battery cir-
cuit. If CB8 opens, the engine will
not crank. CB8 automatically re-
sets when the fault is corrected.
804 197-A / Ref. 801 940
Trailblazer 302 D