HP 9000 300 Series Service Training page 75

9. Then leave ftp:
bye [Return]
10. To replace the old test file with the new:
mv ./SYSTEST /SYSTEST [Return]
11. Change permissions on new file with:
chmod 555 /SYSTEST [Return]
12. You are finished with the installation of the new TSC tests.
13. To run the new tests, power cycle the machine and do a attended boot.
Press any key after the keyboard message appears on screen and/or you hear a double
beep, to get into the attended mode.
14. Type the
ID
code of SYSTEST, usually Is to run the tests.
(ID Code ) [Return]
. The following files can also be ftp'd from the hpfcse.fc.hp.com .. They are not needed to run
the TSC tests, but can be useful.
There is a buglist file that will keep you current on TSC bug fixes.
There is a configuration file that allow you to turn the different tests on and off and change
the order of how the tests are ran.
And last, there is a document file that gives instructions on how to make changes to the
configuration file.
The file names are:
Descri ption
List of bug fixes:
Configuration file:
Configuration
instructions:
File Name
buglist
tsc_cfg
tsc_cfg.6
Also, there is a new Test Tools Manual out for the TSC tests. The part number is
A1421-90030.
B·2 Anonymous FTP to hpfcse