Lesson 5 Quiz Answers - HP 9000 300 Series Service Training

Lesson 5 Quiz Answers
1. To remove a defective memory board, in a Workstation controller, with a CD-ROM drive,
you first have to remove?
a. Top cover
b. Disk tray
c. Front bezel and top cover
d. Both a and b
2. To remove the fan, in both controllers, you first need to remove?
a. Front bezel and speaker
b. Top cover
c. Power supply
d. Both band c
3. To remove the Workstation system board, you have to remove the LAN board's hardware.
a. True
b. False
4. Transfer the good memory and LAN boards to the new system board.
a. True
b. False
5. A one inch drop, while the hard disk drives are upside down will damage the heads.
a. True
b. False
6. To replace the battery, on either system board, you first have to remove?
a. Top cover and support brace
b. DIO card cage
c. Power supply
d. Fan
7. The only time you remove the four screws in the Integrated's front bezel that hold the
CRT, is?
a. When replacing the power supply
b. When replacing the touchscreen LED board
c. When replacing the hard drive
d. When replacing the CRT
8. Where is the terminator on the internal SCSI cable on the Integrated Controller?
a. Rear panel
b. On the cable next to the top floppy conned or
c. On the system board
d. On the disk tray
C-6
Quiz
Answers