Fayat Group BOMAG BC 573 RB-4 Service Manual page 31

1.2.11.4 Maintenance work on electric components and battery
1.2.11.5 Working on the air conditioning
1.2.11.6 Cleaning work
1.2.11.7 After maintenance work
General – Concerning your safety
Check and change coolant only when the engine is cold. Collect
coolant and dispose of it in an environmentally friendly way.
Before starting to work on electric parts of the machine disconnect
the battery and cover it with insulating material.
Do not use fuses with higher ampere ratings and do not bridge
fuses.
When working on the battery, smoking or open fire is prohibited!
Do not lay any tools or other metal objects on the battery.
Do not wear jewellery (watch, bracelets, etc.) when working on the
battery.
The connection cables of the battery must not touch or rub against
machine parts.
Faults on the air conditioning should only be remedied by author-
ized service personnel.
Do not perform welding work in the vicinity of the air conditioning.
Danger of explosion!
Do not release refrigerant into the atmosphere, but dispose of it in
line with environmental regulations.
Do not perform cleaning work while the motor is running.
Allow the engine to cool down before starting cleaning work on
engine and exhaust system.
Never use gasoline or other easily inflammable substances for
cleaning.
When cleaning with a high pressure cleaner, do not subject elec-
trical parts and insulation material to the direct jet of water, or cover
them beforehand.
Do not guide the water jet into the exhaust pipe and into the air
filter.
Reassemble all guards and protective devices.
Close all maintenance flaps and maintenance doors again.
BC 573 RB-4 31