Advertisement
Span adjustment in Rising differential mode or Trailing differential mode
● The span adjustment in rising differential mode or trailing differential
mode can be set as follows. The value is automatically memorized un-
less the Output operation mode is selected after the adjustment or any
switch operation is not carried out within a certain period of time.
● The threshold can be set by using the threshold value fine adjustment
function. For the threshold value fine adjustment function, refer to "
THRESHOLD VALUE FINE ADJUSTMENT FUNCTION."
(Changed intensity)
Short span
13
OUTPUT OPERATION MODE
● When MODE indicator: L/D (yellow) lights up, output operation can be
set.
● Turn the jog switch to "+" or "-" side to switch the output operation.
● Press the jog switch to confirm the setting.
(Light-ON)
Turn
14
TIMER MODE
● When MODE indicator: TIMER (yellow) lights up, timer operation and
timer period can be set.
● Turn the jog switch to "+" or "-" side to switch the timer operation and
the timer period.
● When selecting OFF-delay timer, ON-delay timer or one-shot delay tim-
er, the timer period can be set in the range of approx. 0.5ms or approx.
1 to 9,999ms.
● Press the jog switch to confirm the setting.
● This mode works in conjunction with the timer setting in PRO 1 under
PRO mode. For the timer setting, refer to <PRO 1: Timer setting> in "
PRO MODE."
(No timer)
Turn
(OFF-delay timer)
Turn
Turn
(ON-delay timer)
Turn
(One-shot delay timer)
15
CUSTOM MODE
● When MODE indicator: CUST (yellow) lights up, response time setting,
light-receiving sensitivity setting, emission halt setting, setting of data
bank loading (one unit only) or code setting can be displayed. For the
setting procedure, refer to <PRO 5: CUSTOM setting> in "
MODE."
● Turn the jog switch to "+" or "-" side to switch the setting contents of
each item.
● Press the jog switch to confirm the setting.
● For setting of each item, refer to the following table.
Item
Digital display
Response
time setting
Light-receiving
sensitivity
setting
Emission halt
setting
Setting of data
bank loading
(One unit only)
Code setting
16
PRO MODE
● When MODE indicator: PRO (yellow) lights up, PRO mode can be set.
● Press the jog switch to confirm the setting.
(Changed intensity)
Turn
Long span
(Dark-ON)
(Confirmed)
Press
Turn
Changeable in
timer period
(5ms)
Press
(Confirmed)
Press
(5ms)
Press
(5ms)
Press
Reference item
<PRO 1: Response time setting> in "
MODE"
<PRO 1: Light-receiving sensitivity setting> in
"
PRO MODE"
<PRO 1: Emission halt setting> in "
MODE"
<PRO 3: Setting of data bank loading> in "
PRO MODE"
<PRO 5: Code setting> in "
PRO MODE"
<PRO mode>
<PRO 1>
<PRO 2>
<PRO 3>
PRO
PRO
PRO
<PRO 4>
<PRO 5>
(Press): Confirmed,
Response time
setting
(500μs or less) <Response time setting> (Note 1)
500μs
or less
4ms
or less
<Timer setting>
(No timer)
<Timer period>
Changeable in the range of
approx. 0.5ms or approx. 1 to 9,999ms
OFF-delay
timer
<Timer operation>
No timer
OFF-delay timer
ON-delay timer
One-shot delay timer
Hysteresis
<Hysteresis setting>
setting
(Standard)
Standard
<Shift setting>
(Approx. 15%) <Shift amount>
Changeable in the range of approx.
0 to 999%
Light-receiving
<Light-receiving sensitivity setting>
sensitivity setting
(Level 3)
(Note 2)
Level 3
Level 4
Emission
<Emission halt setting>
halt setting
(Emission)
Emission
Emission halt
Digital display
<Digital display setting>
setting
(Lock OFF)
Lock OFF
Lock ON
Setting of digital
<Setting of digital display turning>
display turning
(Turning OFF)
Turning OFF
Turning ON
<Eco setting>
(Eco OFF)
<Eco setting>
Eco OFF
Eco ON
Manual
Time period
<Time period hold setting>
hold setting
(Hold OFF)
(Note 3)
Hold OFF
Hold ON
Setting of data
bank loading
(1 unit only)
(All)
Automatic
<Setting of data bank loading>
1ch
2ch
Setting of data
bank saving
(1 unit only)
(All)
Automatic
<Setting of data bank saving>
1ch
2ch
<Copy setting>
(YES)
(Blinks)
(2 cycles)
Automatic
Communication
enable / disable
Communication
Communication enable /
setting
enable
disable setting
Communication enable
Communication disable
<Communication protocol setting>
Communication
Communication
mode
protocol setting
Communication mode
Communication halt
(Backup ON)
<Backup setting>
<Backup setting>
Backup ON
Backup OFF
(Turn): Select
80μs
or less
150μs
or less
(5ms)
Small
Large
Level 1
Level 2
(1ch)
(YES)
(Blinks)
(1ch)
(good)
(Blinks 3 times)
3ch
(1ch)
(YES)
(Blinks)
(1ch)
(good)
(Blinks 3 times)
3ch
Automatic
(good)
Advertisement
