Download Print this page

DeWalt DCLE34033 Manual page 15

3 x 360 12v/20v high precision line laser

Advertisement

Available languages

Available languages

Storage Recommendations
The best storage place is one that is cool and dry, away
from direct sunlight and excess heat or cold. Store the
fully charged battery pack out of the charger.
Battery Pack Cleaning
Instructions
Dirt and grease may be removed from the exterior
of the battery pack using a cloth or soft non-metallic
brush. Do not use water or any cleaning solutions.
Fuel Gauge Battery Packs (Fig. C)
Some battery packs include a fuel gauge. When
the fuel gauge button is pressed and held, the LED
lights will indicate the approximate level of charge
remaining. This does not indicate tool functionality and
is subject to variation based on product components,
temperature, and end-user application.
Transportation
WARNING: Fire hazard. Do not store,
carry, or transport the battery pack so that
metal objects can contact exposed battery
terminals. For example, do not place the
battery pack in aprons, pockets, tool boxes,
product kit boxes, drawers, etc., with loose
nails, screws, keys, coins, hand tools, etc.
When transporting individual battery packs,
make sure that the battery terminals are
protected and well insulated from materials
that could contact them and cause a short
circuit. NOTE: Li‑ion battery packs should not
be put in checked baggage on airplanes and
must be properly protected from short circuits
if they are in carry‑on baggage.
The RBRC
Seal
®
Please take your spent battery packs
to an authorized D
WALT service
e
center or to your local retailer for
recycling. In some areas, it is illegal
to place spent battery packs in the trash. You may also
contact your local recycling center for information on
where to drop off the spent battery pack. Do not place
in curbside recycling. For more information visit www.
call2recycle.org. or call the toll free number in the
RBRC® Seal.
RBRC® is a registered trademark of Call
2 Recycle, Inc.
Powering the Laser
This laser can be powered by either of these battery
packs:
• A D
WALT 12V MAX* Li-ion Battery Pack.
e
*Maximum initial battery voltage (measured without a
workload) is 12 volts. Nominal voltage is 10.8.
• A D
WALT 20V MAX* Li-ion Battery Pack.
e
*Maximum initial battery voltage (measured without a
workload) is 20 volts. Nominal voltage is 18.
Battery Type
DCB120, DCB121, DCB122,
12V
DCB123, DCB124, DCB125,
DCB126, DCB127
DCB201, DCB203, DCB203BT,
DCB204, DCB204BT, DCB205,
20V
DCB205BT, DCB206, DCB207,
DCB208, DCB230, DCB240,
DCBP520, DCBP034
Use only DeWALT battery packs and chargers. Use
of any other batteries may create a risk of fire.
Important Safety Instructions
for All Battery Chargers
WARNING: Read all safety warnings,
instructions, and cautionary markings for
the battery pack, charger and product.
Failure to follow the warnings and
instructions may result in electric shock,
fire and/or serious injury.
Battery Pack
E
15

Advertisement

loading