MINOR MAINTENANCE TIPS
ENGINE OIL DRAINING/STRAINER CHECK
Ensure vehicle is in straight position on ground level.
Engine oil should always be drained when the engine is
warmed up sufficiently so that the oil drains faster.
Remove the sump guard and 2 plugs, then clean the
2 strainers.
Check the condition of strainers, if strainers condition
OK please reuse it.
NOTE
Do not reuse the O-rings, renew all O-rings.
Lubricate strainer and O-rings with engine oil.
Push strainers fully into crankcases by hand before
inserting the drain plugs.
Lubricate plug O-rings with water based lubricant.
Tighten torque of drain plugs to 13±1 Nm.
Royal Enfield Himalayan
82
OIL FILLING DURING OIL SERVICE
Ensure vehicle is in straight position on ground level.
Remove the filler cap both cap and O-ring.
Add oil to the engine, fill until the oil level reaches the
maximum mark on the sight glass.
Install the filler cap. Start the engine from cold condi-
tion and run for 1-2 minutes.
Switch off the engine and wait 1 minute.