Royal Enfield Himalayan Owner's Manual page 62

OPERATION OF CONTROLS
 (1) Mobile connectivity symbol - It's shows mobile
connecting and disconnecting indication.
 (2) Ride mode - It can be viewed both performance
mode and ECO mode indication based on the vehicle
riding condition.
 (3) ABS - Will be continuously ON during initial check
up (until or after vehicle running for a particular dis-
tance / speed) and will turn OFF if system is ok, then
will light up again in case of any ABS system malfunc-
tion.
 (4) Turn right - Right turn signal ON.
 (5) High beam indication - Head lamp high beam ON.
 (6) Warning symbol - This indicator glows whenever
the vehicle components fault.
 (7) Turn left - Left turn signal ON.
Royal Enfield Himalayan
60
 (8) Engine MIL - Will be continuously ON in case of
EMS malfunction.
NOTE
 Tell tales lights will switch "OFF" after engine is started.
CAUTION
 Do not run motorcycle in case the malfunction remains
"ON" continuously as it can cause severe damage to
the ECU & Sensors. Please visit the nearest authorised
Royal Enfield dealer to diagnose & rectify the defect in
the EMS.
 Do not run motorcycle in case the ABS indicator lamp
continuously "ON".