Table Of Contents; Introduction - Fostex 1240 Owner's Manual

TABLE OF CONTENTS
PAGE
SECTION 1
Introduction 2
SECTION 2
Name and Function/Operation of 4
Controls and Switches
SECTION
3 Connections with External Equipment 7
SECTION 4
Parametric Equalizer 8
SECTION
5 Interconnections with Various 9
Processors
SECTION 1
.
INTRODUCTION
Thank you for purchasing a Fostex 40-Series Mixer.
Model 1240 has 12 inputs, Model 1840, 18 inputs, and
Model 2440, 24 inputs. All other features are common
to the series.
These consoles are particularly well-suited for multitrack
recording and production/assembly applications, but they
are also useful for PA and sound reinforcement.
Features include phantom powering, complete stereo solo
monitoring, four channels of AUX SEND for effects
processing and switchable line inputs for tape returns/
musical instruments. Both signals can be monitored
simultaneously without sacrificing double input channels.
A unique feature of these mixers is the fader (patent
applied for). Made of a conductive rubber roller assembly,
the action is much smoother and more accurate than the
conventional brush type fader, plus this new design will
last longer and perform more quietly - 47^V p-p.
In order to use this sophisticated electronic device to its
maximum potential, please read this owner's reference
manual thoroughly. With proper use and maintenance, you
will enjoy many years of satisfied performance.
PAGE
SECTION 6
Multitrack Recording
10
SECTION 7
Other Methods of Operation 17
SECTION 8
Trouble Shooting 18
SECTION 9
Notes on After Service 18
SECTION 10
Specifications 19
SECTION11
Block Diagram
20
SAFETY PRECAUTIONS
When switching on power to this unit, always be sure it
is switched on before switching on power to the peripheral
equipment to which the output is connected to prevent
damage to the speaker by a large noise from the monitor
amplifier or to avoid shock to other equipment (recorder,
etc.). Also, when plugging or unplugging cables to the
input and output jacks, be sure the faders, gain, or trim
levels are set to minimum (-
oo, 0
etc.).
Connection to the power supply unit
* When POWER is switched on, the POWER LED is lit
and power is applied to the main Unit.
(Be sure the cable from the power supply unit is
plugged into the main unit, before switching on
POWER.)
2