Interconnections With Various Processors - Fostex 1240 Owner's Manual

SECTION 5.
INTERCONNECTIONS WITH VARIOUS
PROCESSORS
Numerous varieties of processes such as digital reverb
and delay, cnmpressor/iimiter and noise gates are indis¬
pensable tools of music production in recent years. The
Series 40 units are provided with inputs and outputs
convenient For connecting these processor such as AUX
OUT jack 1 ~ 4 (39). SEND/RCV jack (37), D.GUTjack
(33), GROUP
IN
jack 1 - 4 (41), etc.
Among these, the i and
2
AUX OUT jack (39) can be
selected For pre-fader mix or post-fader mix and either
can he chosen according to the application, The GROUP
IN jacks 1 - 4 (41) and STEREO IN Jacks (44) are
Actual connections are shown in the following examples:
Fin-1 USING INDIVIDUAL PROCESSORS AT EACH
INPUT CHANNEL
Thre connection Is eFFaclive ^jr or-tx;-
normally used for effects returns but if there are more
returns, It will be easier to feed ail of these to another
mixer before returning them.
Also, even though all INPUT faders (17) are in use at the
multitrack recorder outputs, the input signals at the INPUT
jacks (33) and (34) can be stereo mixed
in
the SUB MIX
sections (3) and (4) by the alternate change function,
and therefore, by patching the effects outputs to the
INPUT jacks (33) and (34), the same number of returns
as in pul channels Gan be sent to the master recorder.
Sg.2 USING A PROCESSOR COMMON
TO ALL INPUT CHANNELS TO
SEND RETURNS IN INDIVIDUAL
AMOUNTS AND PERSPECTIVES
TO EACH CHANNEL
fl Amount Of effect appfer! to each dhan-
neJ is separator extolled h&e
Pre-fader signals can also bo S^nt
if AUK H -1
Tiwg rt.ua; sc
rtf
channels are used- fix
LiLuTL-u input tvcci processors.
OUT R
Processor [3z
b Ek) Total reverb* ytc
San as =in 41, I he processor output cas-
be returned to INPUT jacks C33J.
W\
and
TAPE IN jacks (36k (In doing so. be
CaruM not to crustu a lOOpI
9