Table of Contents
Advertisement
Quick Links
CABLE CLIMBING SYSTEM
Instruction Manual
User shall read, understand, and follow
manufacturer's instructions before using
this or any fall protection equipment.
FAILURE TO FOLLOW MANUFACTURER'S
INSTRUCTIONS MAY RESULT IN SERIOUS
INJURY OR DEATH.
A copy of the manufacturer's instructions
shall be provided to all users and shall be
retained for the safe use of the system.
2 Safety Information
3 Applicable Safety Standards
3 Intended Use
3 Worker Classifications
3 Permitted Worker Capacity Range
4 Product Specific Applications
4 Limitations
4 Compatibility
5 Inspection
6 Components and Materials
7 Part Descriptions
8 Installation and Use
12 Maintenance, Cleaning, and Storage
12 Diagrams
13 Labels
15 Inspection Log
1600119 Rev. A
Advertisement
Table of Contents
Related Manuals for Guardian CABLE CLIMBING SYSTEM
Summary of Contents for Guardian CABLE CLIMBING SYSTEM
- Page 1 CABLE CLIMBING SYSTEM Instruction Manual 2 Safety Information 3 Applicable Safety Standards 3 Intended Use 3 Worker Classifications 3 Permitted Worker Capacity Range 4 Product Specific Applications 4 Limitations 4 Compatibility 5 Inspection 6 Components and Materials 7 Part Descriptions...
-
Page 2: Safety Information
Safety Information hooks, carabiners, and other connectors must be selected and applied in a compatible fashion. WARNING! Failure to understand and comply All risk of disengagement must be eliminated. All with safety regulations may result in serious snap hooks and carabiners must be self-locking, injury or death. -
Page 3: Applicable Safety Standards
TO A FALL HAZARD EXISTS. Note: Capacity is the combined user weight Cable climbing system shall be used with ANSI including all clothing, tools, and equipment. Z359.11 compliant full body harnesses only. Har- ness must include a Sternal D-ring and must be ... -
Page 4: Product Specific Applications
25034 D-rings: Dorsal WARNING! Use only with compatible Guardian cable climbing sleeve and 3/8” Limitations diameter 1x7 Guardian galvanized steel cable. Fall Clearance: There must be sufficient clearance below the work surface to arrest a... - Page 5 The inspection log must be specific to one Cable Climbing System. Separate inspection logs must WARNING! Prior to each use, be used for each Cable Climbing System. All inspect system to ensure cable is inspection records must be made visible and clean and free from dirt, debris, available to all users at all times.
- Page 6 Components Anchorage Connector Top Bracket 3 ft 6 in (1,04 m) C7 CABLE CLIMBING SLEEVE Top Bracket Extension (SOLD SEPARATELY) Assembly (Optional) Cable Guide Product Label Bottom Bracket see page 14 Materials Galvanized Steel, stainless steel, rubber...
- Page 7 20 ft (6 m) Cable Climbing System, Top and Bottom Brackets 1400306 30 ft (9 m) Cable Climbing System, Top and Bottom Brackets, 1 Cable Guide 1400307 40 ft (12 m) Cable Climbing System, Top and Bottom Brackets, 1 Cable Guide...
-
Page 8: Installation And Use
(12.7 mm) (38 mm) WARNING! May be attached to caged ladder systems provided Cable Climbing System is used Bolt Thread Protrusion as the primary fall arrest system and the ladder cage does not interfere with the normal operation During installation or subsequent pre-use ... -
Page 9: Cable Guide Installation
Top Bracket Installation Cable Guide Installation Step 1 Step 1 Position Top Bracket in center of climbing side Position Cable Guide bracket in center of of compatible ladder rung. Install U-bolt from ladder rung (bracket may be installed on top back side of ladder rung through holes in Top of or underneath rung). - Page 10 Bottom Bracket Installation Tensioning the Cable Step 1 Step 1 Before tensioning, ensure Tensioning Bar Position Bottom Bracket in center of climbing on Bottom Bracket is installed correctly (see side of compatible ladder rung. Install U-bolt image below) and spring on tensioning bar is from back side of ladder rung through holes in fully relaxed.
- Page 11 Anchorage Connector Use Step 3 Tension cable by tightening Tensioning Nut WARNING! Anchorage Connector may be until it is at least flush with bottom of Bracket used to support a MAXIMUM 1 Personal Fall Arrest (see image below). System (PFAS) for use in Fall Arrest applications.
-
Page 12: Maintenance, Cleaning, And Storage
Cable Climbing System. Remove all dirt, corrosives, and contaminants from the system before and after each use. If a Cable Climbing System cannot be cleaned with plain water, use mild soap and water, then rinse and wipe dry. NEVER clean Cable Climbing System with corrosive substances. - Page 13 Diagram B - Connections ...
- Page 14 Read the Instructions | Vea las Instrucciones | Voir les Instructions Read and follow manufacturer’s instructions included at time of shipment. Failure to follow instructions may result in serious injury or death. Use only with compatible Guardian Cable Climbing Sleeve: Part # 25034 and 3/8” (9.5mm) diameter 1x7 galvanized steel cable.
-
Page 15: Inspection Log
Inspection Log Model #: Date of First Use: Serial #: User: Date: Condition: Inspected By:... - Page 16 This warranty is not transferable to any other Guardian service and does not apply to product that is resold after having been put into service. No other person, firm, entity, or the like is authorized to assume or assign for Guardian any other liability in connection with the sale or use of Guardian’s products.