Other Functions - FUTABA FP-3PB Instruction Manual

OTHER FUNCTIONS
PCM/PPM switching
HM When optional Futaba FM receiver used
M PCM/PPM switch
optional Futaba FM receiver can be used
instead of the conventional FM system.
When switching this switch, turn off
PPM
the transmitter power switch. If the
_ power switch is not turned off, PCM— P e Eg en UPLOAD goin gs RE ey ge ee ae
PPM and PPM-—PCM switching cannot However, the F/S and B.F/S functions cannot |
Poem
be performed. be used.
Recommended receiver FP-R103F
(small 3-channel FM receiver)
DSC (Direct Servo Control) function
WUse this function when wanting to adjust
your vehicle without turning on transmitter
during meets and races or when the same
band is used.
CAUTION
@When using this function,
always turn off the transmitter
power switch.
Set using an FET amp Other sets
Steering servo Steering servo
ee €
ea
¢
m Steering servo
= Throttle servo Nicd battery pack (4.8V or 6V)
= AUX servo or penlight battery (x4)
=è Battery/DSC cord
DSC jack