Cleaning And Maintenance; Troubleshooting; Technical Data - Haier I-MASTER MULTI BEVERAGE 5 Series User Manual

Hide thumbs Also See for I-MASTER MULTI BEVERAGE 5 Series:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
GB
5. Cleaning & Maintenance
Refer to image 15 to clean your product. [15]
Before cleaning the main product, please
unplug it.
Do not use abrasive chemicals, metal objects
or hard brushes to clean the appliance.
Remove the frother from the jug.
The cleaning brush delivered with the
appliance is recommended to be used.
Never wash the jug in the dishwasher.
Make sure the connector and the recessed
areas are clean and dry before next use.

6. Troubleshooting

Drink overflow
»
Cause 1: Milk or water exceed the Max level.
Cause 2: The jug inner has scale or is not clean.
»
Solution: Ensure the milk and water does
not exceed the max level (Max water
350ml, Max milk 210ml). Clean jug inner,
ensure it is clean. [3]
Temperature sensor Error (All lights blinking
for 5 seconds, and an audible beep sounds 3
times)
Cause 1: The jug not in the base but drink
»
function selected.
Cause 2: The temperature sensor has short
»
circuited.
Solution: Ensure the jug is placed in the
main product.
If the problem persists contact Customer
Service.
Frother error (Left 3 lights blinking for 5
seconds, and an audible beep sounds 3 times.)
»
Cause 1: The ingredients are too large and
have jammed the frother.
Cause 2: Agitator motor broken.
»
Solution: Remove all ingredients in the
frother and clean thoroughly, ensure the
ingredient is cut into pieces less than
5*5mm.
If the problem persists contact Customer
Service.
Heating element error (Right 4 lights blinking
for 5 seconds, and an audible beep sounds 3
times.)
Cause: Heating element broken.
»
Solution: Contact Customer Service.

7. Technical data

Electrical connection
Power
8. Important information
Haier Spares and Consumables
Always replace parts with genuine Haier spares.
These are available from your local Haier dealer
or direct from Haier. When ordering parts
always quote your model number.
Quality
Haier's factories have been independently
assessed for quality. Our products are made
using a quality system which meets the
requirements of ISO 9001.
Your Guarantee
The guarantee conditions for this appliance are
as defined by our representative in the country
in which it is sold. Details regarding these
conditions can be obtained from the dealer from
whom the appliance was purchased. The bill of
sale or receipt must be produced when making
any claim under the terms of this guarantee.
8
220-240V~50/60Hz
700W

Advertisement

Table of Contents
loading

Table of Contents