Cleaning And Maintenance - Haier HOR54B5MGW1 User Manual

CLEANING AND MAINTENANCE

By ensuring proper cleaning and
maintenance of your cooker you can have
a significant influence on the continuing
fault-free operation of your appliance.
Before you start cleaning,the cooker
must be switched off and you should
ensure that all knobs are set to the"●"
position. Do not start cleaning until
the cooker has completely cooled.
Front side of the casting
For cleaning of frontal part of the cooker
use the usual cleaning agents and follow
the manufacturer's instructions.
Never use any aggressive cleaning agents
or dish cleaning accessories which might
cause scratches.
Enamel coated and plastic surface
Clean the knobs and handles with soft
cloth and liquid cleaners, intended for use
of smooth enamel surfaces.
Cooktop
Gas grid, cooking area and burner
components should be cleaned with warm
water and mild detergent for manual
washing of dishes.
Thermal element and ignition device
should be cleaned with soft brush. To
ensure perfect operation, these elements
must always be thoroughly clean.
Clean the crown and the crown cap.
Always keep the gas outless nozzles on
the burner crown free of dirt.
Upon completion of cleaning wipe all
components dry and replace them carefully
to their respective slots. Oblique position of
components may cause troubled ignition of
burners.
19
Caution!
Crown caps are coated with black enamel.
Discoloration of caps, due to high
temperatures, is inevitable, but is has no
adversary effect on normal operation of
burners.
Oven

The oven should be cleaned after
every use. When cleaning the oven
the lighting should be switched on to
enable you to see the surfaces better.

The oven chamber should only be
washed with warm water and a small
amount of washing-up liquid.

After cleaning the oven chamber wipe
it dry.
Caution!
Do not use cleaning products containing
abrasive materials for the cleaning and
maintenance of the glass front panel.
CLEANING AND MAINTENANCE
Replacement of the oven light
bulb
Remove only
Door removal
In order to obtain easier access to the oven
chamber for cleaning, it is possible
remove the door, to do this, tilt the safety
catch part of the hinge upwards, close the
door lightly, lift and pull it out towards you,
in order to fit the door back on to the
cooker, do the inverse. When fitting,
ensure that the notch of the hinge is
correctly placed on the protrusion of the
hinge holder. After the door is fitted to the
oven, the safety catch should be carefully
lowered down again, if the safety catch is
not set it may cause damage to the hinge
when closing the door.
Door removal
Door removal
20
to