Advertisement
CONNECTIONS
BASIC CONNECTIONS
e
Use an AV TV with video/audio inputs (or a monitor TV).
1
Connect the supplied video cord.
If the TV has an S-VIDEO input jack, connect the supplied S-VIDEO cable.
This unit features 3-line digital Y/C separation circuitry so it is recommended you
connect an S-VIDEO cable to obtain superior picture quality.
UHF antenna
VHF antenna
S VIDEO
Align
the
plug
=
correctly and push
©
into the S-VIDEO jack.
/
Ae
If you use an S-VIDEO cable, refer to your TV's operation
manual.
C=
AC-3 RF OUT
R
Connect to the stereo amp's CD, LD, VDP, or other input
jack with the supplied audio cord. (Do not connect to the
PHONO jack.)
Finally, connect the power cord
to the wall socket.
Once the power cord is connected, even if you switch
power OFF, power is still supplied to the player's
built-in memory (Resume play function etc.). For this
reason, make sure the unit is connected to the wall
socket. If you connect to the amplifier standby power
You can connect to the TV's audio input jack, but it is
SWITCHED OUTLET socket or other socket, functions
recommended you connect to the stereo amplifier to
such as Resume play will not operate.
obtain superior audio playback quality.
.
.
AC-3 RF OUT terminal:
These connections are also possible
This terminal is intended for use with Dolby AC-3* components
è
|f you have a stereo amplifier with optical or coaxial inputs, refer
(*1) planned for future release. With this terminal, you will be able
to page 10. Connection to this unit's digital output (optical or
to connect an AC-3 RF input of amplifiers and surround processors,
coaxial) is possible.
and playback LDs formatted with Dolby AC-3 (*2).
e
|f you have a Pioneer projection monitor, refer to page 11. You can
(*1) Indicated with DQ [petsvsusnous] (For hardware)
connect to this unit's control jack for system remote control.
(*2) Indicated with DO [pemr sonnou] (For software)
if;
H
i
7,)||
"30
IGIIT
t
A
-a
an AV amplifier bearing the Pioneer Wi mark, refer to
You cannot playback currently available LDs, LD players, AV
y
4
f
n
.
amplifiers, etc., with this terminal.
ou can connect to this unit's control jack for system remote
:
;
E
$
centred,
Do not connect this terminals to the audio input terminal of a
normal stereo or AV amplifiers.
"Dolby", "AC-3"and the double-D symbol are trademarks of
Dolby Laboratories Licensing Corporation.
9
<VRB1141>
En
Advertisement
