Advertisement
DISC SIDE ©
To specify side A or B for play:
Side A refers to the upper side of a disc loaded in the table, and B
side refers to the reverse side. This is different from the actual A
and B sides of the disc.
To play side A only, press the DISC SIDE A without pressing
m>/t. After side A has finished, the player stops. To play side B only,
press the DISC SIDE B without pressing »/m. After side B has
finished, the player stops.
DIRECT CD
Since the picture circuit is deactivated and the interference between
signals is eliminated with the Direct CD function, more pure sound
can be reproduced.
e
When the Direct CD function is activated, the player does not
display information on the monitor screen.
e
|In Direct CD mode, time for starting play becomes
short
compared with that of normal play operation.
After performing step 1 on the previous page, press the DIRECT
Switching audio
Each time AUDIO D/A is pressed during playback, audio output is
switched.
For example:
eto hear only the analog audio of a disc with digital audio
eto hear only one channel of stereo disc
eto select audio of the multiplex disc
LD
LD with digital audio
Audio source can be switched between digital audio, analog audio,
L channel and R channel of stereo audio.
digital audio
analog audio
L channel of
les (stereo)
(stereo)
analog dl
R channel of
L channel of
digital audio
digital audio. *—— cain pelea
e With a disc encoded with CX auto-switching signals
ane CX off (stereo)
CX on (stereo) —>
CX on (L channel) ia
CX off (R channel)
— CX off (L channel)
«— CX on (R channel)
e With a disc encoded with CX auto-switching signals
Es stereo audio —>
L channel
——»
R channel
-i
Hea >>
Chapter (Track) Skip - To search for the beginning of a chapter/track
TO PLAY AN LD, CDV OR CD
Indications when disc sides change
e
When changing from side A to side B
To exit Direct CD mode:
Press DIRECT CD again.
To play an LD:
Cancel the Direct CD mode. Otherwise, the LD cannot be set on the
disc table.
NOTE:
During LD play, the player does not enter Direct CD mode even if
DIRECT
CD is pressed.
During CDV play, the player automatically tuns on and off the picture circuit
according to the video part or audio part in the Direct CD mode.
On screen display:
The information is displayed on the screen by pressing DISPLAY on
the remote control unit. Also, when programming or editing, the
information is displayed.
By turning off the screen display or canceling the input mode, the
player automatically turns off the picture circuit, and the screen
turns to black.
LD/CD/CDV
LD with analog audio
CD or CDV
Ez stereo audio —®
L channel
——> R channel a
With a Multi Audio disc (an LD bearing the digital mark and the MULTI
AUDIO mark or the gi@/MutTTAUDIO mark), you can listen to the various
audio tracks recorded on the disc by using AUDIO to select between
the analog and digital tracks, and to select between the left (1/L) and
right (2/R) channels.
NOTE:
With AC-3 discs, sound is not heard when the analog R channel is
selected.
Discs marked with the OX mark
Discs marked OX are recorded with the CX noise reduction system
for powerful audio reproduction with little noise. (Analog audio only)
However, some discs marked OX are not encoded with the signals
necessary to instruct the unit automatically switch on the CX
system. If sound is noisy or undulates when a disc with a CX mark
is played, press AUDIO D/A on the remote control unit.
e (3% is a trademark of CBS Inc. This player meets the CX
EXPANDING SPECIFICATION.
LD/CD/CDV
Searches fot the
a
Searching for the
beginning of the
SKIP
chapter (track)
pe
—
chapter (track).
currently playing.
beginning of the next
Press a button repeatedly or hold it depressed (only with the remote
control unit); the chapters (tracks) will be skipped successively.
e
When ke or BPI is pressed in stop mode, playback starts.
15
<VRB1141>
En
Advertisement
