Advertisement
Vv
LD/CD/CDV
TO SEARCH FOR A PARTICULAR TIME/FRAME -
Time Number Search/Track Time Search/ABS Time Search/Frame Number Search
Time Number Search - Example : To search for the scene located at time number 12 min. 34 sec (CLV)
a
1. Press CHP/TM during playback.
CAUTION
When the display shows chapter No., press this button.
If a disc does not contain information on the digits of seconds,
specify the time number only as far as the minute digits.
2. Enter [U |, [2], [3] and [4] with the digit buttons.
If you make a mistake during entry:
Press CLEAR to reset the time number to "0.00", and then press
the correct digit buttons.
3. Press PLAY >.
Track Time Search - To search for a time on a specified track (CD/CDV)
. Press CHP/TM.
. Press SKIP << or >> so that the desired track number
appears in the front panel display window.
. Enter the track time (elapsed time from the beginning of the
specified track) with the digit buttons (0 - 9).
. Press PLAY >.
ABS Time Search (CD only) - To search for a point by designating the elapsed time from the beginning of the disc
1. Press CHP/TM so that "Ab" appears in the front panel
display window. (On the monitor screen, "ABS" appears.)
2. Enter the elapsed time from the beginning of the disc with
the digit buttons (0 - 9).
3. Press PLAY >.
Playback starts from the specified elapsed time.
Frame Number Search (CAV disc only) - To search by designating the frame number
Any desired frame can be searched for by specifying its frame
number.
1. Press CHP/TM during playback. When the display shows
chapter No., press this button again. "Frame 0" is displayed.
2. Enter the required frame number with the digit buttons (0 - 9).
3. Press PLAY >.
NOTES:
To exit search mode:
e
The +10 button does not function.
Press CLEAR.
e
/f you make a mistake during entry, press CLEAR and press the
correct digit buttons.
When PLAY > on the remote control unit is pressed:
A still frame is displayed (LD or video part of CDV). To start normal
playback, press PLAY >.
21
<VRB1141>
En
Advertisement
