Table of Contents
Advertisement
CONNECTING WITH AUDIO EQUIPMENT OR
OTHER ELECTRONIC MUSICAL INSTRUMENTS
The FP-9 has high-quality built-in stereo speakers that let you easily enjoy performing, but you can also hook up a stereo system,
and enjoy performances that are even more impressive. You can also record what you play on a tape recorder or the like.
Before you connect any external equipment, be sure that the power to the FP-9 is off.
Playing Audio Equipment or Other Digital Instruments
Through the FP-9's Speakers—The Line In Jacks and Line In
Level Knob
If you want to play along on the keyboard with the sound from an audio device such as a CD player or an electronic instrument
like a rhythm machine, then connect the L and R Line In jacks to the corresponding L and R Output (or Line Out) jacks on the
external device.
You can also hook up a device with no built-in speakers (such as a microphone or a guitar),
and hear it through the FP-9's
speakers.
Making the Connections
If you're using the Line In jacks to connect an external device, follow the steps below to make the connections. If this is not done in
the correct sequence, you risk causing malfunction and/or damage to speakers on the FP-9 or the connected device.
1.
Turn the volume all the way down on the FP-9 and on
4.
Use a connecting cable (such as the PJ-1M, sold sepa-
the device you're about to connect.
rately) to make the connection.
2.
Set the Line In Level control on the back of the FP-9 to
5.
Switch on the connected device.
Line.
6. Switch on the FP-9.
3. Switch off the power to the FP-9 and the device you're
about to connect.
Example: Let's connect a synthesizer.
What you need: Two "1/4" phone to 1/4" phone " connecting cables (such as the P]-1M, sold separately)
Output UR
Line In L/R
(Line Out)
Mior
Computer
~~ Tine it
1.
Make the connections as illustrated above.
3.
Use the [Speaker Volume] knob on the front panel to
Follow the steps in "Making the
Connections" to hook up the
adjust the volume level from the FP-9's speakers.
devices.
If the external equipment is a monaural-output
;
i
evel
k
shack
o f
2 P_c
F
x
2.
Use the Line In Level knob on the back of the FP-9 to
Nort
device, be sure to connect to the L (Mono) Line
adjust the level (volume) of input from the connected
In jack on the EP-9.
device.
at
smaller ©)
touder
is "eed
Line tn
22
Advertisement
Table of Contents
